Move SD-card definition to module level. While at it, also disable
write-protect since the Colibri standard does not define a pin for
SD-Card write-protection.
Signed-off-by: Stefan Agner <ste...@agner.ch>
---
arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 4 ----
arch/arm/boot/dts/imx7-colibri.dtsi | 8 ++++++++
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 1545661..373ee19 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -138,10 +138,6 @@
};
&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
- no-1-8-v;
- cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
keep-power-in-suspend;
wakeup-source;
status = "okay";
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi
b/arch/arm/boot/dts/imx7-colibri.dtsi
index 0a9d3a8..044b83e 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -251,6 +251,14 @@
dr_mode = "host";
};
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+ no-1-8-v;
+ cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ disable-wp;
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
&pinctrl_gpio4>;
--
2.9.0
