The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi").These also applies to ARM and it will also allow to get rid of the following DTC warnings in the future: "Node /memory has a reg or ranges property, but no unit name" But the sl50 board doesn't have a, so removing the skeleton.dtsi inclusion from am33xx.dtsi will cause a change in the compiled DTB. The board has 512 MiB of RAM and its starting address is 0x80000000, so add a proper memory device node in the DTS. Signed-off-by: Javier Martinez Canillas <[email protected]> --- arch/arm/boot/dts/am335x-sl50.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index f802adb23ff9..e3be7a6bf8f1 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -19,6 +19,11 @@ }; }; + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + chosen { stdout-path = &uart0; }; -- 2.7.4
