Sorry, please ignore, send wrong patch.
On 2016/9/1 9:34, Kefeng Wang wrote:
> Use an unified new dev variable instead of &pdev->dev and p->dev
> in probe function.
>
> Signed-off-by: Kefeng Wang <wangkefeng.w...@huawei.com>
> ---
> drivers/tty/serial/8250/8250_dw.c | 45
> ++++++++++++++++++++-------------------
> 1 file changed, 23 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_dw.c
> b/drivers/tty/serial/8250/8250_dw.c
> index 3478c2c..225d797 100644
> --- a/drivers/tty/serial/8250/8250_dw.c
> +++ b/drivers/tty/serial/8250/8250_dw.c
> @@ -363,18 +363,19 @@ static int dw8250_probe(struct platform_device *pdev)
> struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> int irq = platform_get_irq(pdev, 0);
> struct uart_port *p = &uart.port;
> + struct device *dev = &pdev->dev;
> struct dw8250_data *data;
> int err;
> u32 val;
>
> if (!regs) {
> - dev_err(&pdev->dev, "no registers defined\n");
> + dev_err(dev, "no registers defined\n");
> return -EINVAL;
> }
>
> if (irq < 0) {
> if (irq != -EPROBE_DEFER)
> - dev_err(&pdev->dev, "cannot get irq\n");
> + dev_err(dev, "cannot get irq\n");
> return irq;
> }
>
> @@ -385,17 +386,17 @@ static int dw8250_probe(struct platform_device *pdev)
> p->pm = dw8250_do_pm;
> p->type = PORT_8250;
> p->flags = UPF_SHARE_IRQ | UPF_FIXED_PORT;
> - p->dev = &pdev->dev;
> + p->dev = dev;
> p->iotype = UPIO_MEM;
> p->serial_in = dw8250_serial_in;
> p->serial_out = dw8250_serial_out;
> p->set_termios = dw8250_set_termios;
>
> - p->membase = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
> + p->membase = devm_ioremap(dev, regs->start, resource_size(regs));
> if (!p->membase)
> return -ENOMEM;
>
> - data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> if (!data)
> return -ENOMEM;
>
> @@ -403,57 +404,57 @@ static int dw8250_probe(struct platform_device *pdev)
> data->usr_reg = DW_UART_USR;
> p->private_data = data;
>
> - data->uart_16550_compatible = device_property_read_bool(p->dev,
> + data->uart_16550_compatible = device_property_read_bool(dev,
> "snps,uart-16550-compatible");
>
> - err = device_property_read_u32(p->dev, "reg-shift", &val);
> + err = device_property_read_u32(dev, "reg-shift", &val);
> if (!err)
> p->regshift = val;
>
> - err = device_property_read_u32(p->dev, "reg-io-width", &val);
> + err = device_property_read_u32(dev, "reg-io-width", &val);
> if (!err && val == 4) {
> p->iotype = UPIO_MEM32;
> p->serial_in = dw8250_serial_in32;
> p->serial_out = dw8250_serial_out32;
> }
>
> - if (device_property_read_bool(p->dev, "dcd-override")) {
> + if (device_property_read_bool(dev, "dcd-override")) {
> /* Always report DCD as active */
> data->msr_mask_on |= UART_MSR_DCD;
> data->msr_mask_off |= UART_MSR_DDCD;
> }
>
> - if (device_property_read_bool(p->dev, "dsr-override")) {
> + if (device_property_read_bool(dev, "dsr-override")) {
> /* Always report DSR as active */
> data->msr_mask_on |= UART_MSR_DSR;
> data->msr_mask_off |= UART_MSR_DDSR;
> }
>
> - if (device_property_read_bool(p->dev, "cts-override")) {
> + if (device_property_read_bool(dev, "cts-override")) {
> /* Always report CTS as active */
> data->msr_mask_on |= UART_MSR_CTS;
> data->msr_mask_off |= UART_MSR_DCTS;
> }
>
> - if (device_property_read_bool(p->dev, "ri-override")) {
> + if (device_property_read_bool(dev, "ri-override")) {
> /* Always report Ring indicator as inactive */
> data->msr_mask_off |= UART_MSR_RI;
> data->msr_mask_off |= UART_MSR_TERI;
> }
>
> /* Always ask for fixed clock rate from a property. */
> - device_property_read_u32(p->dev, "clock-frequency", &p->uartclk);
> + device_property_read_u32(dev, "clock-frequency", &p->uartclk);
>
> /* If there is separate baudclk, get the rate from it. */
> - data->clk = devm_clk_get(&pdev->dev, "baudclk");
> + data->clk = devm_clk_get(dev, "baudclk");
> if (IS_ERR(data->clk) && PTR_ERR(data->clk) != -EPROBE_DEFER)
> - data->clk = devm_clk_get(&pdev->dev, NULL);
> + data->clk = devm_clk_get(dev, NULL);
> if (IS_ERR(data->clk) && PTR_ERR(data->clk) == -EPROBE_DEFER)
> return -EPROBE_DEFER;
> if (!IS_ERR_OR_NULL(data->clk)) {
> err = clk_prepare_enable(data->clk);
> if (err)
> - dev_warn(&pdev->dev, "could not enable optional
> baudclk: %d\n",
> + dev_warn(dev, "could not enable optional baudclk: %d\n",
> err);
> else
> p->uartclk = clk_get_rate(data->clk);
> @@ -461,11 +462,11 @@ static int dw8250_probe(struct platform_device *pdev)
>
> /* If no clock rate is defined, fail. */
> if (!p->uartclk) {
> - dev_err(&pdev->dev, "clock rate not defined\n");
> + dev_err(dev, "clock rate not defined\n");
> return -EINVAL;
> }
>
> - data->pclk = devm_clk_get(&pdev->dev, "apb_pclk");
> + data->pclk = devm_clk_get(dev, "apb_pclk");
> if (IS_ERR(data->clk) && PTR_ERR(data->clk) == -EPROBE_DEFER) {
> err = -EPROBE_DEFER;
> goto err_clk;
> @@ -473,12 +474,12 @@ static int dw8250_probe(struct platform_device *pdev)
> if (!IS_ERR(data->pclk)) {
> err = clk_prepare_enable(data->pclk);
> if (err) {
> - dev_err(&pdev->dev, "could not enable apb_pclk\n");
> + dev_err(dev, "could not enable apb_pclk\n");
> goto err_clk;
> }
> }
>
> - data->rst = devm_reset_control_get_optional(&pdev->dev, NULL);
> + data->rst = devm_reset_control_get_optional(dev, NULL);
> if (IS_ERR(data->rst) && PTR_ERR(data->rst) == -EPROBE_DEFER) {
> err = -EPROBE_DEFER;
> goto err_pclk;
> @@ -510,8 +511,8 @@ static int dw8250_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, data);
>
> - pm_runtime_set_active(&pdev->dev);
> - pm_runtime_enable(&pdev->dev);
> + pm_runtime_set_active(dev);
> + pm_runtime_enable(dev);
>
> return 0;
>
>
