This patchset adds new thermal sensor driver to support 3 sensors found in R-Car Gen3 series.
It has been decided to create new driver, instead of using the existing thermal driver due to many differences in HW setting flows, the method to calculate temperatures value and some newly supported features. The new driver can support both polling mode and interrupt mode. It has been tested with R-Car H3. I expect same result on R-Car M3. This driver is developed based on early work of Hien Dang and Thao Nguyen. All comments are welcome. Khiem Nguyen (5): thermal: rcar_gen3_thermal: Document the R-Car Gen3 thermal bindings thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver support arm64: dts: r8a7795: Add R-Car Gen3 thermal support arm64: dts: r8a7796: Add R-Car Gen3 thermal support arm64: defconfig: Enable R-Car Gen3 thermal support .../bindings/thermal/rcar-gen3-thermal.txt | 79 +++ arch/arm64/boot/dts/renesas/r8a7795.dtsi | 83 ++++ arch/arm64/boot/dts/renesas/r8a7796.dtsi | 83 ++++ arch/arm64/configs/defconfig | 2 + drivers/thermal/Kconfig | 9 + drivers/thermal/Makefile | 1 + drivers/thermal/rcar_gen3_thermal.c | 539 +++++++++++++++++++++ 7 files changed, 796 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt create mode 100644 drivers/thermal/rcar_gen3_thermal.c -- 1.9.1
