Please check other patches previously sent - these conflict with the
patch series I sent last week. This use is already gone.
On Tue, Sep 06, 2016 at 03:53:27PM +0200, Arnd Bergmann wrote:
> Since commit 489447380a29 ("[PATCH] handle errors returned by
> platform_get_irq*()") ten years ago, the sa1111 driver refuses to
> work without an interrupt line passed in its resources, so the
> check for NO_IRQ is unnecessary.
>
> I have also checked that all four machines files that register
> an sa1111 device (lubbock, badge4, journada720, and neponset)
> do set an interrupt line.
>
> Signed-off-by: Arnd Bergmann <[email protected]>
> ---
> arch/arm/common/sa1111.c | 16 ++++++----------
> 1 file changed, 6 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
> index fb0a0a4dfea4..64d8cf08b7d0 100644
> --- a/arch/arm/common/sa1111.c
> +++ b/arch/arm/common/sa1111.c
> @@ -751,11 +751,9 @@ static int __sa1111_probe(struct device *me, struct
> resource *mem, int irq)
> * The interrupt controller must be initialised before any
> * other device to ensure that the interrupts are available.
> */
> - if (sachip->irq != NO_IRQ) {
> - ret = sa1111_setup_irq(sachip, pd->irq_base);
> - if (ret)
> - goto err_unmap;
> - }
> + ret = sa1111_setup_irq(sachip, pd->irq_base);
> + if (ret)
> + goto err_unmap;
>
> #ifdef CONFIG_ARCH_SA1100
> {
> @@ -834,12 +832,10 @@ static void __sa1111_remove(struct sa1111 *sachip)
> clk_disable(sachip->clk);
> clk_unprepare(sachip->clk);
>
> - if (sachip->irq != NO_IRQ) {
> - irq_set_chained_handler_and_data(sachip->irq, NULL, NULL);
> - irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
> + irq_set_chained_handler_and_data(sachip->irq, NULL, NULL);
> + irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
>
> - release_mem_region(sachip->phys + SA1111_INTC, 512);
> - }
> + release_mem_region(sachip->phys + SA1111_INTC, 512);
>
> iounmap(sachip->base);
> clk_put(sachip->clk);
> --
> 2.9.0
>
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
