Now that we have support for the CCU driver in sunxi-ng, convert the A23 and A33 DTs to that driver.
Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]> --- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 257 ++++++++--------------------------- arch/arm/boot/dts/sun8i-a23.dtsi | 51 ++----- arch/arm/boot/dts/sun8i-a33.dtsi | 73 ++-------- 3 files changed, 75 insertions(+), 306 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 6d6509c71009..7246663bacdd 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -46,7 +46,9 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun8i-a23-a33-ccu.h> #include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/reset/sun8i-a23-a33-ccu.h> / { interrupt-parent = <&gic>; @@ -60,7 +62,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll6 0>; + clocks = <&ccu CLK_BUS_LCD>, <&ccu CLK_BUS_DE_BE>, + <&ccu CLK_LCD_CH0>, <&ccu CLK_DE_BE>, + <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_DRC>; status = "disabled"; }; }; @@ -111,151 +115,6 @@ clock-frequency = <32768>; clock-output-names = "osc32k"; }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - /* dummy clock until actually implemented */ - pll5: pll5_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - clock-output-names = "pll5"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6", "pll6x2"; - }; - - cpu: cpu_clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20050 0x4>; - - /* - * PLL1 is listed twice here. - * While it looks suspicious, it's actually documented - * that way both in the datasheet and in the code from - * Allwinner. - */ - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; - clock-output-names = "cpu"; - }; - - axi: axi_clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-axi-clk"; - reg = <0x01c20050 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb1: ahb1_clk@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-ahb1-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; - clock-output-names = "ahb1"; - }; - - apb1: apb1_clk@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb1>; - clock-output-names = "apb1"; - }; - - apb1_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun8i-a23-apb1-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb1>; - clock-indices = <0>, <5>, - <12>, <13>; - clock-output-names = "apb1_codec", "apb1_pio", - "apb1_daudio0", "apb1_daudio1"; - }; - - apb2: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; - clock-output-names = "apb2"; - }; - - apb2_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun8i-a23-apb2-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb2>; - clock-indices = <0>, <1>, - <2>, <16>, - <17>, <18>, - <19>, <20>; - clock-output-names = "apb2_i2c0", "apb2_i2c1", - "apb2_i2c2", "apb2_uart0", - "apb2_uart1", "apb2_uart2", - "apb2_uart3", "apb2_uart4"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>; - clock-output-names = "nand"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun8i-a23-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&osc24M>; - clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic", - "usb_hsic_12M", "usb_ohci0"; - }; }; soc@01c00000 { @@ -268,23 +127,23 @@ compatible = "allwinner,sun8i-a23-dma"; reg = <0x01c02000 0x1000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ahb1_gates 6>; - resets = <&ahb1_rst 6>; + clocks = <&ccu CLK_BUS_DMA>; + resets = <&ccu RST_BUS_DMA>; #dma-cells = <1>; }; mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&ahb1_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; + clocks = <&ccu CLK_BUS_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb1_rst 8>; + resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -295,15 +154,15 @@ mmc1: mmc@01c10000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&ahb1_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; + clocks = <&ccu CLK_BUS_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb1_rst 9>; + resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -314,15 +173,15 @@ mmc2: mmc@01c11000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&ahb1_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; + clocks = <&ccu CLK_BUS_MMC2>, + <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb1_rst 10>; + resets = <&ccu RST_BUS_MMC2>; reset-names = "ahb"; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -334,9 +193,9 @@ compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ahb1_gates 13>, <&nand_clk>; + clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>; clock-names = "ahb", "mod"; - resets = <&ahb1_rst 13>; + resets = <&ccu RST_BUS_NAND>; reset-names = "ahb"; status = "disabled"; #address-cells = <1>; @@ -347,8 +206,8 @@ compatible = "allwinner,sun8i-a23-ehci", "generic-ehci"; reg = <0x01c1a000 0x100>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ahb1_gates 26>; - resets = <&ahb1_rst 26>; + clocks = <&ccu CLK_BUS_EHCI>; + resets = <&ccu RST_BUS_EHCI>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -358,18 +217,26 @@ compatible = "allwinner,sun8i-a23-ohci", "generic-ohci"; reg = <0x01c1a400 0x100>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ahb1_gates 29>, <&usb_clk 16>; - resets = <&ahb1_rst 29>; + clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>; + resets = <&ccu RST_BUS_OHCI>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; }; + ccu: clock@01c20000 { + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + pio: pinctrl@01c20800 { /* compatible gets set in SoC specific dtsi file */ reg = <0x01c20800 0x400>; /* interrupts get set in SoC specific dtsi file */ - clocks = <&apb1_gates 5>; + clocks = <&ccu CLK_BUS_PIO>; gpio-controller; interrupt-controller; #interrupt-cells = <3>; @@ -437,24 +304,6 @@ }; }; - ahb1_rst: reset@01c202c0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202c0 0xc>; - }; - - apb1_rst: reset@01c202d0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d0 0x4>; - }; - - apb2_rst: reset@01c202d8 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d8 0x4>; - }; - timer@01c20c00 { compatible = "allwinner,sun4i-a10-timer"; reg = <0x01c20c00 0xa0>; @@ -490,8 +339,8 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb2_gates 16>; - resets = <&apb2_rst 16>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; dmas = <&dma 6>, <&dma 6>; dma-names = "rx", "tx"; status = "disabled"; @@ -503,8 +352,8 @@ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb2_gates 17>; - resets = <&apb2_rst 17>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; dmas = <&dma 7>, <&dma 7>; dma-names = "rx", "tx"; status = "disabled"; @@ -516,8 +365,8 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb2_gates 18>; - resets = <&apb2_rst 18>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; dma-names = "rx", "tx"; status = "disabled"; @@ -529,8 +378,8 @@ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb2_gates 19>; - resets = <&apb2_rst 19>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; dmas = <&dma 9>, <&dma 9>; dma-names = "rx", "tx"; status = "disabled"; @@ -542,8 +391,8 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&apb2_gates 20>; - resets = <&apb2_rst 20>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; dmas = <&dma 10>, <&dma 10>; dma-names = "rx", "tx"; status = "disabled"; @@ -553,8 +402,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb2_gates 0>; - resets = <&apb2_rst 0>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -564,8 +413,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b000 0x400>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb2_gates 1>; - resets = <&apb2_rst 1>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -575,8 +424,8 @@ compatible = "allwinner,sun6i-a31-i2c"; reg = <0x01c2b400 0x400>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb2_gates 2>; - resets = <&apb2_rst 2>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 92e6616979ea..a915feb3a494 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -49,47 +49,12 @@ reg = <0x40000000 0x40000000>; }; - clocks { - ahb1_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun8i-a23-ahb1-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb1>; - clock-indices = <1>, <6>, - <8>, <9>, <10>, - <13>, <14>, - <19>, <20>, - <21>, <24>, <26>, - <29>, <32>, <36>, - <40>, <44>, <46>, - <52>, <53>, - <54>, <57>; - clock-output-names = "ahb1_mipidsi", "ahb1_dma", - "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", - "ahb1_nand", "ahb1_sdram", - "ahb1_hstimer", "ahb1_spi0", - "ahb1_spi1", "ahb1_otg", "ahb1_ehci", - "ahb1_ohci", "ahb1_ve", "ahb1_lcd", - "ahb1_csi", "ahb1_be", "ahb1_fe", - "ahb1_gpu", "ahb1_msgbox", - "ahb1_spinlock", "ahb1_drc"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5>; - clock-output-names = "mbus"; - }; - }; - soc@01c00000 { usb_otg: usb@01c19000 { compatible = "allwinner,sun6i-a31-musb"; reg = <0x01c19000 0x0400>; - clocks = <&ahb1_gates 24>; - resets = <&ahb1_rst 24>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "mc"; phys = <&usbphy 0>; @@ -104,12 +69,12 @@ <0x01c1a800 0x4>; reg-names = "phy_ctrl", "pmu1"; - clocks = <&usb_clk 8>, - <&usb_clk 9>; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>; clock-names = "usb0_phy", "usb1_phy"; - resets = <&usb_clk 0>, - <&usb_clk 1>; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>; reset-names = "usb0_reset", "usb1_reset"; status = "disabled"; @@ -118,6 +83,10 @@ }; }; +&ccu { + compatible = "allwinner,sun8i-a23-ccu"; +}; + &pio { compatible = "allwinner,sun8i-a23-pinctrl"; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 001d8402ca18..f3d91d2c96ef 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -63,75 +63,22 @@ reg = <0x40000000 0x80000000>; }; - clocks { - /* Dummy clock for pll11 (DDR1) until actually implemented */ - pll11: pll11_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - clock-output-names = "pll11"; - }; - - ahb1_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun8i-a33-ahb1-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb1>; - clock-indices = <1>, <5>, - <6>, <8>, <9>, - <10>, <13>, <14>, - <19>, <20>, - <21>, <24>, <26>, - <29>, <32>, <36>, - <40>, <44>, <46>, - <52>, <53>, - <54>, <57>, - <58>; - clock-output-names = "ahb1_mipidsi", "ahb1_ss", - "ahb1_dma","ahb1_mmc0", "ahb1_mmc1", - "ahb1_mmc2", "ahb1_nand", "ahb1_sdram", - "ahb1_hstimer", "ahb1_spi0", - "ahb1_spi1", "ahb1_otg", "ahb1_ehci", - "ahb1_ohci", "ahb1_ve", "ahb1_lcd", - "ahb1_csi", "ahb1_be", "ahb1_fe", - "ahb1_gpu", "ahb1_msgbox", - "ahb1_spinlock", "ahb1_drc", - "ahb1_sat"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "ss"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5>, <&pll11>; - clock-output-names = "mbus"; - }; - }; - soc@01c00000 { crypto: crypto-engine@01c15000 { compatible = "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ahb1_gates 5>, <&ss_clk>; + clocks = <&ccu CLK_BUS_SS>, <&ccu CLK_SS>; clock-names = "ahb", "mod"; - resets = <&ahb1_rst 5>; + resets = <&ccu RST_BUS_SS>; reset-names = "ahb"; }; usb_otg: usb@01c19000 { compatible = "allwinner,sun8i-a33-musb"; reg = <0x01c19000 0x0400>; - clocks = <&ahb1_gates 24>; - resets = <&ahb1_rst 24>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "mc"; phys = <&usbphy 0>; @@ -146,12 +93,12 @@ <0x01c1a800 0x4>; reg-names = "phy_ctrl", "pmu1"; - clocks = <&usb_clk 8>, - <&usb_clk 9>; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>; clock-names = "usb0_phy", "usb1_phy"; - resets = <&usb_clk 0>, - <&usb_clk 1>; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>; reset-names = "usb0_reset", "usb1_reset"; status = "disabled"; @@ -160,6 +107,10 @@ }; }; +&ccu { + compatible = "allwinner,sun8i-a33-ccu"; +}; + &pio { compatible = "allwinner,sun8i-a33-pinctrl"; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, -- 2.9.3
