Am Samstag, 10. September 2016, 17:01:34 CEST schrieb Andy Yan:
> PX3 board is designed by Rockchip for automotive field,
> which intergrated with CVBS(TP2825)/MIPI DSI/LVDS/HDMI
> video input/output interface, WIFI/BT/GPS(on a module
> named S500 which based on MT6620), Gsensor BMA250E and
> light&proximity sensor STK3410.
>
> Signed-off-by: Andy Yan <andy....@rock-chips.com>
[...]
> diff --git a/arch/arm/boot/dts/rk3188-px3.dts
> b/arch/arm/boot/dts/rk3188-px3.dts new file mode 100644
> index 0000000..ece45d7
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3188-px3.dts
> @@ -0,0 +1,337 @@
> +/*
> + * Copyright (c) 2016 Andy Yan <andy....@rock-chips.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/input.h>
> +#include "rk3188.dtsi"
> +
> +/ {
> + model = "Rockchip PX3";
> + compatible = "rockchip,px3", "rockchip,rk3188";
> +
> + chosen {
> + bootargs = "console=ttyS2,115200 earlyprintk";
> + };
setting bootargs isn't favoured, you can instead use
stdout-path = "serial2:115200n8";
to define the default console
> +&i2c0 {
> + status = "okay";
> +
> + /* Accelerometer */
> + bma250@18 {
> + compatible = "bma250";
> + reg = <0x18>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
> + };
driver seems to be missing a devicetree binding (module_id_table
and dt-binding document)
> + stk3410@48 {
> + compatible = "STK3310";
> + reg = <0x48>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> + };
> +};
driver seems to be missing a devicetree binding (module_id_table
and dt-binding document)
> +&i2c2 {
> + gsl1680: touchscreen@40 {
> + compatible = "gsl1680";
> + reg = <0x40>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
> + power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <1280>;
> + silead,max-fingers = <5>;
> + };
this should probably be
"silead,gsl1680"
see
https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tree/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
