On Sun, Sep 18, 2016 at 10:01:18PM +0800, Randy Li wrote:
> The TOPEET itop exynos 4412 have three versions base board. The
> Elite version is the cheap one without too much peripheral devices
> on it.
> Currently supported are serial console, wired networking(USB),
> USB OTG in peripheral mode, USB host, SD storage, GPIO buttons,
> PWM beeper, ADC and LEDs. The WM8960 analog audio codec is also
> The FIMC is not used for camera currently, I enabled it just for a
> colorspace convertor.
> Signed-off-by: Randy Li <ay...@soulik.info>
> .../bindings/arm/samsung/samsung-boards.txt | 3 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/exynos4412-itop-elite.dts | 240
> 3 files changed, 244 insertions(+)
> create mode 100644 arch/arm/boot/dts/exynos4412-itop-elite.dts
Looks good to me, for the record:
Reviewed-by: Krzysztof Kozlowski <k...@kernel.org>
You don't need to resend the third patch. Rob took it.