The current rk3066a based boards(Rayeager, Bqcurie2, Marsboard) use
pwm modulate vdd_logic voltage, but the pwm is default disabled and
the pwm pin acts as a gpio before pwm regulator probed, so the pwm
regulator driver will get a zero dutycycle at probe time, so change
the initial dutycycle to zero to match pwm_regulator_init_state check.

Signed-off-by: Andy Yan <andy....@rock-chips.com>

---

 arch/arm/boot/dts/rk3066a-bqcurie2.dts  | 2 +-
 arch/arm/boot/dts/rk3066a-marsboard.dts | 2 +-
 arch/arm/boot/dts/rk3066a-rayeager.dts  | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts 
b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index bc674ee..618450d 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -61,7 +61,7 @@
                regulator-min-microvolt = <1200000>;
                regulator-max-microvolt = <1200000>;
                regulator-always-on;
-               voltage-table = <1000000 100>,
+               voltage-table = <1000000 0>,
                                <1200000 42>;
                status = "okay";
        };
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts 
b/arch/arm/boot/dts/rk3066a-marsboard.dts
index a2b763e..ddc680b 100644
--- a/arch/arm/boot/dts/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -59,7 +59,7 @@
                regulator-min-microvolt = <1200000>;
                regulator-max-microvolt = <1200000>;
                regulator-always-on;
-               voltage-table = <1000000 100>,
+               voltage-table = <1000000 0>,
                                <1200000 42>;
                status = "okay";
        };
diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts 
b/arch/arm/boot/dts/rk3066a-rayeager.dts
index 2536b3a..30aee99 100644
--- a/arch/arm/boot/dts/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rk3066a-rayeager.dts
@@ -84,7 +84,7 @@
                regulator-min-microvolt = <1200000>;
                regulator-max-microvolt = <1200000>;
                regulator-always-on;
-               voltage-table = <1000000 100>,
+               voltage-table = <1000000 0>,
                                <1200000 42>;
                status = "okay";
        };
-- 
2.7.4


Reply via email to