On Mon, Aug 22, 2016 at 10:09:18AM +0000, Po Liu wrote:
> Hi Bjorn,
> 
> Sorry for late reply.
> 
> I checked the updated kernel with Dongdong mentioned ACPI patch which was 
> truly affected my quirk patch uploaded. So I suppose the quirk patch is not 
> qualify to fix the bug.

I don't understand what you're saying here.  

The quirk worked on your machine.  It apparently didn't work on
Dongdong's machine because of_irq_parse_and_map_pci() is run after the
quirk in this path:

  pci_device_probe
    pcibios_alloc_irq                 # arm64
      dev->irq = of_irq_parse_and_map_pci

and of_irq_parse_and_map_pci() returned zero, probably because
of_irq_parse_pci() failed.  My guess is that the reason it works on
your machine but not Dongdong's is that your DTs are different such
that of_irq_parse_pci() works for you but not for Dongdong.

I think the idea of of_irq_parse_and_map_pci() is to set up a device's
INTx line.  But that doesn't quite apply here because your device
doesn't actually *use* INTx.  So I don't know why of_irq_parse_pci()
works for you.  Maybe that's a symptom of a problem in your DT.

Or maybe you're saying that the quirk *didn't* work on your machine
when you tested it in a kernel that included d8ed75d59332 ("ARM64:
PCI: ACPI support for legacy IRQs parsing and consolidation with DT
code").   But that doesn't make sense either, because prior to
d8ed75d59332, we *always* set

  dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);

and after the patch we only do it if "acpi_disabled".  I guess I just
don't understand what you're saying.

> I were keep thinking what your "explicitly checking for a root port device" 
> meaning. Do you mean I should upload again the first version patch which fix 
> it in the portdrv_core.c ? I would upload again if yes. 

No, I did not mean you should go back to the first version of the
patch.  If we *can* do this in a quirk, I think that would be much
better than doing it in the PCIe port driver.  I meant that Dongdong's
suggestion of adding this:

  if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
    return;

to your quirk made sense to me.

> >  -----Original Message-----
> >  From: Bjorn Helgaas [mailto:helg...@kernel.org]
> >  Sent: Saturday, July 30, 2016 6:42 AM
> >  To: Po Liu
> >  Cc: linux-...@vger.kernel.org; linux-arm-ker...@lists.infradead.org;
> >  linux-kernel@vger.kernel.org; devicet...@vger.kernel.org; Roy Zang; Arnd
> >  Bergmann; Marc Zyngier; Stuart Yoder; Yang-Leo Li; Minghuan Lian; Murali
> >  Karicheri; Bjorn Helgaas; Shawn Guo; Mingkai Hu
> >  Subject: Re: [PATCH v3 2/2] pci/aer: interrupt fixup in the quirk
> >  
> >  On Tue, Jun 14, 2016 at 04:24:05PM +0800, Po Liu wrote:
> >  > On some platforms, root port doesn't support MSI/MSI-X/INTx in RC mode.
> >  > When chip support the aer interrupt with none MSI/MSI-X/INTx mode,
> >  > maybe there is interrupt line for aer pme etc. Search the interrupt
> >  > number in the fdt file. Then fixup the dev->irq with it.
> >  >
> >  > Signed-off-by: Po Liu <po....@nxp.com>
> >  
> >  I'm not sure where we're at with this.  Dongdong had some issue
> >  (possibly with a version of the quirk on a different platform?), and I
> >  think the suggestion of explicitly checking for a root port device was a
> >  good one.
> >  
> >  So please update and repost this for next cycle.
> >  
> >  > ---
> >  > changes for V3:
> >  >  - Move to quirk;
> >  >  - Only correct the irq in RC mode;
> >  >
> >  >  drivers/pci/quirks.c | 29 +++++++++++++++++++++++++++++
> >  >  1 file changed, 29 insertions(+)
> >  >
> >  > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index
> >  > ee72ebe..8b39cce 100644
> >  > --- a/drivers/pci/quirks.c
> >  > +++ b/drivers/pci/quirks.c
> >  > @@ -25,6 +25,7 @@
> >  >  #include <linux/sched.h>
> >  >  #include <linux/ktime.h>
> >  >  #include <linux/mm.h>
> >  > +#include <linux/of_irq.h>
> >  >  #include <asm/dma.h>    /* isa_dma_bridge_buggy */
> >  >  #include "pci.h"
> >  >
> >  > @@ -4419,3 +4420,31 @@ static void quirk_intel_qat_vf_cap(struct
> >  pci_dev *pdev)
> >  >          }
> >  >  }
> >  >  DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x443,
> >  > quirk_intel_qat_vf_cap);
> >  > +
> >  > +/* If root port doesn't support MSI/MSI-X/INTx in RC mode,
> >  > + * but use standalone irq. Read the device tree for the aer
> >  > + * interrupt number.
> >  > + */
> >  > +static void quirk_aer_interrupt(struct pci_dev *dev) {
> >  > +        int ret;
> >  > +        u8 header_type;
> >  > +        struct device_node *np = NULL;
> >  > +
> >  > +        /* Only for the RC mode device */
> >  > +        pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
> >  > +        if ((header_type & 0x7F) != PCI_HEADER_TYPE_BRIDGE)
> >  > +                return;
> >  > +
> >  > +        if (dev->bus->dev.of_node)
> >  > +                np = dev->bus->dev.of_node;
> >  > +
> >  > +        if (IS_ENABLED(CONFIG_OF_IRQ) && np) {
> >  > +                ret = of_irq_get_byname(np, "aer");
> >  > +                if (ret > 0) {
> >  > +                        dev->no_msi = 1;
> >  > +                        dev->irq = ret;
> >  > +                }
> >  > +        }
> >  > +}
> >  > +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID,
> >  > +quirk_aer_interrupt);
> >  > --
> >  > 2.1.0.27.g96db324
> >  >
> >  >
> >  > _______________________________________________
> >  > linux-arm-kernel mailing list
> >  > linux-arm-ker...@lists.infradead.org
> >  > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-ker...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Reply via email to