On Tue, Sep 20, 2016 at 11:11:53PM +0200, Johannes Stezenbach wrote:
> On Tue, Sep 20, 2016 at 05:59:43PM +0200, Johannes Stezenbach wrote:
> > On Tue, Sep 20, 2016 at 01:40:14PM +0300, Mika Westerberg wrote:
> > > If yes, it probably does not have the normal Fixed power button but
> > > instead it has something called "Windows button array device" with
> > > _HID/_CID of PNP0C40. Looking at your dsdt.dsl, this looks to be the
> > > case.
> > > 
> > > That device is driven by soc_button_array.c driver which can be enabled
> > > with CONFIG_KEYBOARD_GPIO=y and CONFIG_INPUT_SOC_BUTTON_ARRAY=y. Can you
> > > check if you have that enabled already?
> > > 
> > > You should actually see it in /proc/interrupts with names like "power"
> > > and so on.
> > 
> > I added CONFIG_INPUT_SOC_BUTTON_ARRAY=y, but no joy.
> > Maybe because the _HID is INTCFD9, only _CID is PNP0C40?
> > It also has a _DSM with UUID dfbcf3c5-e7a5-44e6-9c1f-29c76f6e059c.
> 
> Or it is because the PNP0C40 device depends on GpioInt from PMIC
> which isn't available...
> 
>             Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource 
> Settings
>             {
>                 Name (CBUF, ResourceTemplate ()
>                 {
>                     GpioInt (Edge, ActiveBoth, ExclusiveAndWake, PullUp, 
> 0x0BB8,
>                         "\\_SB.PCI0.I2C7.PMI2", 0x00, ResourceConsumer, ,
>                         )
>                         {   // Pin list
>                             0x0016
>                         }
>                 })
>                 Return (CBUF) /* \_SB_.TBAD._CRS.CBUF */
>             }

Most likely this is the reason. I'll try to find if we have an existing
driver for this PMIC somewhere. I guess this is the Dollar Cove which is
successor of Crystal Cove IIRC which is already supported by the
mainline kernel.

Reply via email to