On Thu, 22 Sep 2016 19:59:13 +0530 Jagan Teki <jagannadh.t...@gmail.com> wrote:
> On Mon, Aug 29, 2016 at 6:54 PM, Jagan Teki <jagannadh.t...@gmail.com> wrote: > > On Wed, Aug 10, 2016 at 2:10 AM, Jagan Teki <jt...@openedev.com> wrote: > >> Add quad page program support with the use of nor->flags > >> and then controller will use 4 lines for data transmission > >> which is quite faster than page program(02h) > >> > >> Cc: Brian Norris <computersforpe...@gmail.com> > >> Signed-off-by: Jagan Teki <jt...@openedev.com> > >> --- > >> drivers/mtd/spi-nor/spi-nor.c | 13 +++++++++++++ > >> include/linux/mtd/spi-nor.h | 2 ++ > >> 2 files changed, 15 insertions(+) > >> > >> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c > >> index d0fc165..f88bd7e 100644 > >> --- a/drivers/mtd/spi-nor/spi-nor.c > >> +++ b/drivers/mtd/spi-nor/spi-nor.c > >> @@ -75,6 +75,7 @@ struct flash_info { > >> * bit. Must be used with > >> * SPI_NOR_HAS_LOCK. > >> */ > >> +#define SPI_NOR_QUAD_WRITE BIT(10) /* Flash supports Quad Write */ > >> }; > >> > >> #define JEDEC_MFR(info) ((info)->id[0]) > >> @@ -1306,6 +1307,7 @@ int spi_nor_scan(struct spi_nor *nor, const char > >> *name, enum read_mode mode) > >> struct device *dev = nor->dev; > >> struct mtd_info *mtd = &nor->mtd; > >> struct device_node *np = spi_nor_get_flash_node(nor); > >> + bool need_quad = false; > >> int ret; > >> int i; > >> > >> @@ -1441,6 +1443,7 @@ int spi_nor_scan(struct spi_nor *nor, const char > >> *name, enum read_mode mode) > >> return ret; > >> } > >> nor->flash_read = SPI_NOR_QUAD; > >> + need_quad = true; > >> } else if (mode == SPI_NOR_DUAL && info->flags & > >> SPI_NOR_DUAL_READ) { > >> nor->flash_read = SPI_NOR_DUAL; > >> } > >> @@ -1465,6 +1468,16 @@ int spi_nor_scan(struct spi_nor *nor, const char > >> *name, enum read_mode mode) > >> } > >> > >> nor->program_opcode = SPINOR_OP_PP; > >> + if (nor->flags == SNOR_F_USE_QPP && info->flags & > >> SPI_NOR_QUAD_WRITE) { > >> + if (!need_quad) > >> + ret = set_quad_mode(nor, info); > >> + if (ret) { > >> + dev_err(dev, "quad mode not supported\n"); > >> + return ret; > >> + } > >> + } > >> + nor->program_opcode = SPINOR_OP_QPP; > >> + } > >> > >> if (info->addr_width) > >> nor->addr_width = info->addr_width; > >> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h > >> index c425c7b..aa0e6cd 100644 > >> --- a/include/linux/mtd/spi-nor.h > >> +++ b/include/linux/mtd/spi-nor.h > >> @@ -46,6 +46,7 @@ > >> #define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual SPI) */ > >> #define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad SPI) */ > >> #define SPINOR_OP_PP 0x02 /* Page program (up to 256 bytes) > >> */ > >> +#define SPINOR_OP_QPP 0x32 /* Quad Page program */ > >> #define SPINOR_OP_BE_4K 0x20 /* Erase 4KiB block */ > >> #define SPINOR_OP_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */ > >> #define SPINOR_OP_BE_32K 0x52 /* Erase 32KiB block */ > >> @@ -119,6 +120,7 @@ enum spi_nor_ops { > >> enum spi_nor_option_flags { > >> SNOR_F_USE_FSR = BIT(0), > >> SNOR_F_HAS_SR_TB = BIT(1), > >> + SNOR_F_USE_QPP = BIT(2), > >> }; > >> > >> /** > >> -- > >> 2.7.4 > >> > > > > Ping! > > Any comments? will resend rebased v2 if it is OK? Did you look at Cyrille's work [1]? It seems you're trying to support the same kind of features. Can you sync with him? [1]http://lkml.iu.edu/hypermail/linux/kernel/1606.2/03302.html