4.7-stable review patch. If anyone has any objections, please let me know.
------------------ From: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com> commit 519d8bd4b5d3d82c413eac5bb42b106bb4b9ec15 upstream. The previous driver is possible to stop the transfer wrongly. For example: 1) An interrupt happens, but not BRDY interruption. 2) Read INTSTS0. And than state->intsts0 is not set to BRDY. 3) BRDY is set to 1 here. 4) Read BRDYSTS. 5) Clear the BRDYSTS. And then. the BRDY is cleared wrongly. Remarks: - The INTSTS0.BRDY is read only. - If any bits of BRDYSTS are set to 1, the BRDY is set to 1. - If BRDYSTS is 0, the BRDY is set to 0. So, this patch adds condition to avoid such situation. (And about NRDYSTS, this is not used for now. But, avoiding any side effects, this patch doesn't touch it.) Fixes: d5c6a1e024dd ("usb: renesas_usbhs: fixup interrupt status clear method") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com> Signed-off-by: Felipe Balbi <felipe.ba...@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org> --- drivers/usb/renesas_usbhs/mod.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) --- a/drivers/usb/renesas_usbhs/mod.c +++ b/drivers/usb/renesas_usbhs/mod.c @@ -282,9 +282,16 @@ static irqreturn_t usbhs_interrupt(int i if (usbhs_mod_is_host(priv)) usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC); - usbhs_write(priv, BRDYSTS, ~irq_state.brdysts); + /* + * The driver should not clear the xxxSTS after the line of + * "call irq callback functions" because each "if" statement is + * possible to call the callback function for avoiding any side effects. + */ + if (irq_state.intsts0 & BRDY) + usbhs_write(priv, BRDYSTS, ~irq_state.brdysts); usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts); - usbhs_write(priv, BEMPSTS, ~irq_state.bempsts); + if (irq_state.intsts0 & BEMP) + usbhs_write(priv, BEMPSTS, ~irq_state.bempsts); /* * call irq callback functions