On 9/21/2016 6:43 PM, Pengcheng Li wrote: > After dwc2_core_reset，register is to the initial value, and the USBTrdTim > vale is 0x5. If hsotg->phyif = GUSBCFG_PHYIF8, after the dwc2_writel,the > value is 0xd.So we need to set the USBTrdTim to 0.
[++ Felipe] Looks good. But please clean up the subject and message Subject: usb: dwc2: Clear GUSBCFG.UsbTrdTim before setting Description: The USBTRDTIM field needs to be cleared before setting a new value. Otherwise it will result in an incorrect value if phyif == GUSBCFG_PHYIF8. With that Acked-by: John Youn <johny...@synopsys.com> Thanks, John > > Signed-off-by: Pengcheng Li <lpc...@hisilicon.com> > --- > drivers/usb/dwc2/gadget.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c > index af46adf..9e52e4f 100644 > --- a/drivers/usb/dwc2/gadget.c > +++ b/drivers/usb/dwc2/gadget.c > @@ -2531,7 +2531,7 @@ void dwc2_hsotg_core_init_disconnected(struct > dwc2_hsotg *hsotg, > /* keep other bits untouched (so e.g. forced modes are not lost) */ > usbcfg = dwc2_readl(hsotg->regs + GUSBCFG); > usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP | > - GUSBCFG_HNPCAP); > + GUSBCFG_HNPCAP | GUSBCFG_USBTRDTIM_MASK); > > /* set the PLL on, remove the HNP/SRP and set the PHY */ > val = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5; > @@ -3413,7 +3413,7 @@ static void dwc2_hsotg_init(struct dwc2_hsotg *hsotg) > /* keep other bits untouched (so e.g. forced modes are not lost) */ > usbcfg = dwc2_readl(hsotg->regs + GUSBCFG); > usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP | > - GUSBCFG_HNPCAP); > + GUSBCFG_HNPCAP | GUSBCFG_USBTRDTIM_MASK); > > /* set the PLL on, remove the HNP/SRP and set the PHY */ > trdtim = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5; >
