The patch regulator: core: don't return error with inadequate reason
has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 577766175c40d4f425be47b9e70d80238e53f996 Mon Sep 17 00:00:00 2001 From: Joonwoo Park <[email protected]> Date: Mon, 19 Sep 2016 14:46:54 -0700 Subject: [PATCH] regulator: core: don't return error with inadequate reason drms_uA_update() always returns failure when it cannot find regulator's input voltage. But if hardware supports load configuration with ops->set_load() and the input regulator isn't specified with valid reason such as the input regulator is battery, not finding input voltage is normal so such case should not return with an error. Avoid such inadequate error return by checking input/output voltages only when drms_uA_update() is about to configure load with enum based ops->set_mode(). Cc: Liam Girdwood <[email protected]> Cc: Mark Brown <[email protected]> Cc: Bjorn Andersson <[email protected]> Cc: [email protected] Signed-off-by: Joonwoo Park <[email protected]> Signed-off-by: Mark Brown <[email protected]> --- drivers/regulator/core.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index db320e8fa865..bafcdff42872 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -679,24 +679,6 @@ static int drms_uA_update(struct regulator_dev *rdev) !rdev->desc->ops->set_load) return -EINVAL; - /* get output voltage */ - output_uV = _regulator_get_voltage(rdev); - if (output_uV <= 0) { - rdev_err(rdev, "invalid output voltage found\n"); - return -EINVAL; - } - - /* get input voltage */ - input_uV = 0; - if (rdev->supply) - input_uV = regulator_get_voltage(rdev->supply); - if (input_uV <= 0) - input_uV = rdev->constraints->input_uV; - if (input_uV <= 0) { - rdev_err(rdev, "invalid input voltage found\n"); - return -EINVAL; - } - /* calc total requested load */ list_for_each_entry(sibling, &rdev->consumer_list, list) current_uA += sibling->uA_load; @@ -709,6 +691,24 @@ static int drms_uA_update(struct regulator_dev *rdev) if (err < 0) rdev_err(rdev, "failed to set load %d\n", current_uA); } else { + /* get output voltage */ + output_uV = _regulator_get_voltage(rdev); + if (output_uV <= 0) { + rdev_err(rdev, "invalid output voltage found\n"); + return -EINVAL; + } + + /* get input voltage */ + input_uV = 0; + if (rdev->supply) + input_uV = regulator_get_voltage(rdev->supply); + if (input_uV <= 0) + input_uV = rdev->constraints->input_uV; + if (input_uV <= 0) { + rdev_err(rdev, "invalid input voltage found\n"); + return -EINVAL; + } + /* now get the optimum mode for our new total regulator load */ mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, output_uV, current_uA); -- 2.9.3
