[PATCH 2/7] ARM: dts: am335x-icev2: Disable Industrial I/O LEDs and fix naming

[Andrew F. Davis]

The LEDs tied to the Industrial I/O output pins are meant for providing
status feed-back and are not the primary use for the pins. Disable
this use by default. Also unify the LED naming across IDK platforms.

Signed-off-by: Andrew F. Davis <a...@ti.com>
Signed-off-by: Sekhar Nori <nsek...@ti.com>
---
 arch/arm/boot/dts/am335x-icev2.dts | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-icev2.dts 
b/arch/arm/boot/dts/am335x-icev2.dts
index d46efc6..fa3f5dc 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -43,52 +43,52 @@
                enable-active-high;
        };
 
-       leds0 {
+       leds-iio {
+               status = "disabled";
                compatible = "gpio-leds";
-
-               led0 {
+               led-out0 {
                        label = "out0";
                        gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
                        default-state = "off";
                };
 
-               led1 {
+               led-out1 {
                        label = "out1";
                        gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
                        default-state = "off";
                };
 
-               led2 {
+               led-out2 {
                        label = "out2";
                        gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
                        default-state = "off";
                };
 
-               led3 {
+               led-out3 {
                        label = "out3";
                        gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
                        default-state = "off";
                };
 
-               led4 {
+               led-out4 {
                        label = "out4";
                        gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
                        default-state = "off";
                };
 
-               led5 {
+               led-out5 {
                        label = "out5";
                        gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
                        default-state = "off";
                };
 
-               led6 {
+               led-out6 {
                        label = "out6";
                        gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
                        default-state = "off";
                };
 
-               led7 {
+               led-out7 {
                        label = "out7";
                        gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
                        default-state = "off";
-- 
2.10.0