On Monday 10 October 2016 06:48 PM, Rob Herring wrote: > On Thu, Oct 06, 2016 at 10:43:52AM +0530, Mugunthan V N wrote: >> Add documention of ti,impedance-control which can be used to > > Needs updating.
Oops, will update this in next version. > >> correct MAC impedance mismatch using phy extended registers. >> >> Signed-off-by: Mugunthan V N <mugunthan...@ti.com> >> --- >> Documentation/devicetree/bindings/net/ti,dp83867.txt | 12 ++++++++++++ >> 1 file changed, 12 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt >> b/Documentation/devicetree/bindings/net/ti,dp83867.txt >> index 5d21141..85bf945 100644 >> --- a/Documentation/devicetree/bindings/net/ti,dp83867.txt >> +++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt >> @@ -9,6 +9,18 @@ Required properties: >> - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h >> for applicable values >> >> +Optional property: >> + - ti,min-output-impedance - MAC Interface Impedance control to set >> + the programmable output impedance to >> + minimum value (35 ohms). >> + - ti,max-output-impedance - MAC Interface Impedance control to set >> + the programmable output impedance to >> + maximum value (70 ohms). > > Define what are valid range of values for these. The values are already mentioned in documentation as 35/70 ohms. Are you mentioning about the register values? Regards Mugunthan V N