On Thu, Oct 13, 2016 at 10:46:34AM -0400, David Miller wrote:
> From: Zach Brown <zach.br...@ni.com>
> Date: Tue, 11 Oct 2016 15:26:20 -0500
>
> > From: Josh Cartwright <josh.cartwri...@ni.com>
> >
> > Create an option CONFIG_LED_TRIGGER_PHY (default n), which will
> > create a set of led triggers for each instantiated PHY device. There is
> > one LED trigger per link-speed, per-phy.
> >
> > This allows for a user to configure their system to allow a set of LEDs
> > to represent link state changes on the phy.
> >
> > Signed-off-by: Josh Cartwright <josh.cartwri...@ni.com>
> > Signed-off-by: Nathan Sullivan <nathan.sulli...@ni.com>
> > Signed-off-by: Zach Brown <zach.br...@ni.com>
> ...
> > + static const char * const name_suffix[] = {
> > + "10Mbps",
> > + "100Mbps",
> > + "1Gbps",
> > + "2.5Gbps",
> > + "10Gbps",
>
> This choice of both the array size and the speeds to support seems
> entirely arbitrary and is inappropriate for a generic driver of this
> kind.
>
> This seems to be hard coding this to support the list of speeds
> supported by whatever driver you want to use with this new LED
> facility, and sorry that's not how we build nice generic pieces of
> infrastructure.
>
> Thanks.
The speeds listed are the speeds found in the phy_speed_to_str function in
phy.c.
They are also the speeds found in the struct phy_setting settings array,
which is commented with
"/* A mapping of all SUPPORTED settings to speed/duplex */"
We believed they represented the commonly supported speeds of phys.
Do you have suggestions on how to better handle the choice of the array size
and the speeds?
Thanks.
