On 09/28/2016 11:20 PM, Benoit Parrot wrote:
> From: Nikhil Devshatwar <nikhil...@ti.com>
> 
> Current VPE driver does not start the job until all the buffers for
> a transaction are not queued. When running in multiple context, this might

I think this should be: s/not queued/queued/, right?

> increase the processing latency.
> 
> Alternate solution would be to try to continue the same context as long as
> buffers for the transaction are ready; else switch the context. This may
> increase number of context switches but it reduces latency significantly.
> 
> In this approach, the job_ready always succeeds as long as there are
> buffers on the CAPTURE and OUTPUT stream. Processing may start immediately
> as the first 2 iterations don't need extra source buffers. Shift all the
> source buffers after each iteration and remove the oldest buffer.
> 
> Also, with this removes the constraint of pre buffering 3 buffers before
> call to STREAMON in case of de-interlacing.
> 
> Signed-off-by: Nikhil Devshatwar <nikhil...@ti.com>
> Signed-off-by: Benoit Parrot <bpar...@ti.com>
> ---
>  drivers/media/platform/ti-vpe/vpe.c | 32 ++++++++++++++++----------------
>  1 file changed, 16 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/media/platform/ti-vpe/vpe.c 
> b/drivers/media/platform/ti-vpe/vpe.c
> index a0b29685fb69..9c38eff5df46 100644
> --- a/drivers/media/platform/ti-vpe/vpe.c
> +++ b/drivers/media/platform/ti-vpe/vpe.c
> @@ -898,15 +898,14 @@ static struct vpe_ctx *file2ctx(struct file *file)
>  static int job_ready(void *priv)
>  {
>       struct vpe_ctx *ctx = priv;
> -     int needed = ctx->bufs_per_job;
>  
> -     if (ctx->deinterlacing && ctx->src_vbs[2] == NULL)
> -             needed += 2;    /* need additional two most recent fields */
> -
> -     if (v4l2_m2m_num_src_bufs_ready(ctx->fh.m2m_ctx) < needed)
> -             return 0;
> -
> -     if (v4l2_m2m_num_dst_bufs_ready(ctx->fh.m2m_ctx) < needed)
> +     /*
> +      * This check is needed as this might be called directly from driver
> +      * When called by m2m framework, this will always satisy, but when

typo: satisfy

> +      * called from vpe_irq, this might fail. (src stream with zero buffers)
> +      */
> +     if (v4l2_m2m_num_src_bufs_ready(ctx->fh.m2m_ctx) <= 0 ||
> +             v4l2_m2m_num_dst_bufs_ready(ctx->fh.m2m_ctx) <= 0)
>               return 0;
>  
>       return 1;
> @@ -1116,19 +1115,20 @@ static void device_run(void *priv)
>       struct sc_data *sc = ctx->dev->sc;
>       struct vpe_q_data *d_q_data = &ctx->q_data[Q_DATA_DST];
>  
> -     if (ctx->deinterlacing && ctx->src_vbs[2] == NULL) {
> -             ctx->src_vbs[2] = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
> -             WARN_ON(ctx->src_vbs[2] == NULL);
> -             ctx->src_vbs[1] = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
> -             WARN_ON(ctx->src_vbs[1] == NULL);
> -     }
> -
>       ctx->src_vbs[0] = v4l2_m2m_src_buf_remove(ctx->fh.m2m_ctx);
>       WARN_ON(ctx->src_vbs[0] == NULL);
>       ctx->dst_vb = v4l2_m2m_dst_buf_remove(ctx->fh.m2m_ctx);
>       WARN_ON(ctx->dst_vb == NULL);
>  
>       if (ctx->deinterlacing) {
> +
> +             if (ctx->src_vbs[2] == NULL) {
> +                     ctx->src_vbs[2] = ctx->src_vbs[0];
> +                     WARN_ON(ctx->src_vbs[2] == NULL);
> +                     ctx->src_vbs[1] = ctx->src_vbs[0];
> +                     WARN_ON(ctx->src_vbs[1] == NULL);
> +             }
> +
>               /*
>                * we have output the first 2 frames through line average, we
>                * now switch to EDI de-interlacer
> @@ -1349,7 +1349,7 @@ static irqreturn_t vpe_irq(int irq_vpe, void *data)
>       }
>  
>       ctx->bufs_completed++;
> -     if (ctx->bufs_completed < ctx->bufs_per_job) {
> +     if (ctx->bufs_completed < ctx->bufs_per_job && job_ready(ctx)) {
>               device_run(ctx);
>               goto handled;
>       }
> 

Regards,

        Hans

Reply via email to