[PATCH 9/9] ARM: dts: amlogic: enable gpio interrupt controller on meson8

[Jerome Brunet]

Signed-off-by: Jerome Brunet <jbru...@baylibre.com>
---
 arch/arm/boot/dts/meson8.dtsi  | 11 +++++++++++
 arch/arm/boot/dts/meson8b.dtsi | 11 +++++++++++
 2 files changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 45619f6162c5..713a22456ff1 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -43,6 +43,8 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/meson8-gpio.h>
 /include/ "meson.dtsi"
 
@@ -91,6 +93,13 @@
                clock-frequency = <141666666>;
        };
 
+       gpio_interrupt: interrupt-controller@c1109880 {
+               compatible = "amlogic,meson8-gpio-intc";
+               reg = <0xc1109880 0x10>;
+               interrupt-controller;
+               #interrupt-cells = <2>;
+       };
+
        pinctrl_cbus: pinctrl@c1109880 {
                compatible = "amlogic,meson8-cbus-pinctrl";
                reg = <0xc1109880 0x10>;
@@ -106,6 +115,7 @@
                        reg-names = "mux", "pull", "pull-enable", "gpio";
                        gpio-controller;
                        #gpio-cells = <2>;
+                       interrupt-parent = <&gpio_interrupt>;
                };
 
                spi_nor_pins: nor {
@@ -148,6 +158,7 @@
                        reg-names = "mux", "pull", "gpio";
                        gpio-controller;
                        #gpio-cells = <2>;
+                       interrupt-parent = <&gpio_interrupt>;
                };
 
                uart_ao_a_pins: uart_ao_a {
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 41fd53671859..36a239a645f5 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -44,6 +44,8 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/meson8b-clkc.h>
 #include <dt-bindings/gpio/meson8b-gpio.h>
 #include <dt-bindings/reset/amlogic,meson8b-reset.h>
@@ -183,6 +185,13 @@
                        status = "disabled";
                };
 
+               gpio_interrupt: interrupt-controller@c1109880 {
+                       compatible = "amlogic,meson8b-gpio-intc";
+                       reg = <0xc1109880 0x10>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
                pinctrl_cbus: pinctrl@c1109880 {
                        compatible = "amlogic,meson8b-cbus-pinctrl";
                        reg = <0xc1109880 0x10>;
@@ -198,6 +207,7 @@
                                reg-names = "mux", "pull", "pull-enable", 
"gpio";
                                gpio-controller;
                                #gpio-cells = <2>;
+                               interrupt-parent = <&gpio_interrupt>;
                        };
                };
 
@@ -215,6 +225,7 @@
                                reg-names = "mux", "pull", "gpio";
                                gpio-controller;
                                #gpio-cells = <2>;
+                               interrupt-parent = <&gpio_interrupt>;
                        };
 
                        uart_ao_a_pins: uart_ao_a {
-- 
2.7.4