Add device tree support for the tsl2583 IIO driver with no custom
properties.

Signed-off-by: Brian Masney <masn...@onstation.org>
---
 .../devicetree/bindings/iio/light/tsl2583.txt      | 26 ++++++++++++++++++++++
 drivers/staging/iio/light/tsl2583.c                | 13 +++++++++++
 2 files changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/light/tsl2583.txt

diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.txt 
b/Documentation/devicetree/bindings/iio/light/tsl2583.txt
new file mode 100644
index 0000000..8e2066c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/tsl2583.txt
@@ -0,0 +1,26 @@
+* TAOS TSL 2580/2581/2583 ALS sensor
+
+Required properties:
+
+  - compatible: Should be one of
+               "amstaos,tsl2580"
+               "amstaos,tsl2581"
+               "amstaos,tsl2583"
+  - reg: the I2C address of the device
+
+Optional properties:
+
+  - interrupt-parent: should be the phandle for the interrupt controller
+  - interrupts: the sole interrupt generated by the device
+
+  Refer to interrupt-controller/interrupts.txt for generic interrupt client
+  node bindings.
+
+  - vcc-supply: phandle to the regulator that provides power to the sensor.
+
+Example:
+
+tsl2581@29 {
+       compatible = "amstaos,tsl2581";
+       reg = <0x29>;
+};
diff --git a/drivers/staging/iio/light/tsl2583.c 
b/drivers/staging/iio/light/tsl2583.c
index 08f1583..fd4b6ef 100644
--- a/drivers/staging/iio/light/tsl2583.c
+++ b/drivers/staging/iio/light/tsl2583.c
@@ -947,11 +947,24 @@ static struct i2c_device_id taos_idtable[] = {
 };
 MODULE_DEVICE_TABLE(i2c, taos_idtable);
 
+#ifdef CONFIG_OF
+static const struct of_device_id taos2583_of_match[] = {
+       { .compatible = "amstaos,tsl2580", },
+       { .compatible = "amstaos,tsl2581", },
+       { .compatible = "amstaos,tsl2583", },
+       { },
+};
+MODULE_DEVICE_TABLE(of, taos2583_of_match);
+#else
+#define taos2583_of_match NULL
+#endif
+
 /* Driver definition */
 static struct i2c_driver taos_driver = {
        .driver = {
                .name = "tsl2583",
                .pm = TAOS_PM_OPS,
+               .of_match_table = taos2583_of_match,
        },
        .id_table = taos_idtable,
        .probe = taos_probe,
-- 
2.7.4

Reply via email to