Re: [PATCH v4 21/26] staging: iio: tsl2583: clarified comment about clearing interrupts

[Jonathan Cameron]

On 12/11/16 18:19, Brian Masney wrote:
> The comment that describes the code that clears the interrupt bit was
> vague and didn't provide much value. This patch adds more detail about
> why that bit needs to be cleared.
> 
> Signed-off-by: Brian Masney <masn...@onstation.org>
Applied.
> ---
>  drivers/staging/iio/light/tsl2583.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/staging/iio/light/tsl2583.c 
> b/drivers/staging/iio/light/tsl2583.c
> index 806cb0a..727ed49 100644
> --- a/drivers/staging/iio/light/tsl2583.c
> +++ b/drivers/staging/iio/light/tsl2583.c
> @@ -205,8 +205,9 @@ static int tsl2583_get_lux(struct iio_dev *indio_dev)
>       }
>  
>       /*
> -      * clear status, really interrupt status (interrupts are off), but
> -      * we use the bit anyway - don't forget 0x80 - this is a command
> +      * Clear the pending interrupt status bit on the chip to allow the next
> +      * integration cycle to start. This has to be done even though this
> +      * driver currently does not support interrupts.
>        */
>       ret = i2c_smbus_write_byte(chip->client,
>                                  (TSL2583_CMD_REG | TSL2583_CMD_SPL_FN |
>