3.2.84-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Alan Stern <st...@rowland.harvard.edu>
commit 53e5f36fbd2453ad69a3369a1db62dc06c30a4aa upstream.
UBSAN complains about a left shift by -1 in proc_do_submiturb(). This
can occur when an URB is submitted for a bulk or control endpoint on
a high-speed device, since the code doesn't bother to check the
endpoint type; normally only interrupt or isochronous endpoints have
a nonzero bInterval value.
Aside from the fact that the operation is illegal, it shouldn't matter
because the result isn't used. Still, in theory it could cause a
hardware exception or other problem, so we should work around it.
This patch avoids doing the left shift unless the shift amount is >= 0.
The same piece of code has another problem. When checking the device
speed (the exponential encoding for interrupt endpoints is used only
by high-speed or faster devices), we need to look for speed >=
USB_SPEED_SUPER as well as speed == USB_SPEED HIGH. The patch adds
this check.
Signed-off-by: Alan Stern <st...@rowland.harvard.edu>
Reported-by: Vittorio Zecca <zec...@gmail.com>
Tested-by: Vittorio Zecca <zec...@gmail.com>
Suggested-by: Bjørn Mork <bj...@mork.no>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <b...@decadent.org.uk>
---
drivers/usb/core/devio.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -1281,11 +1281,17 @@ static int proc_do_submiturb(struct dev_
as->urb->setup_packet = (unsigned char *)dr;
as->urb->start_frame = uurb->start_frame;
as->urb->number_of_packets = uurb->number_of_packets;
- if (uurb->type == USBDEVFS_URB_TYPE_ISO ||
- ps->dev->speed == USB_SPEED_HIGH)
- as->urb->interval = 1 << min(15, ep->desc.bInterval - 1);
- else
- as->urb->interval = ep->desc.bInterval;
+
+ if (ep->desc.bInterval) {
+ if (uurb->type == USBDEVFS_URB_TYPE_ISO ||
+ ps->dev->speed == USB_SPEED_HIGH ||
+ ps->dev->speed >= USB_SPEED_SUPER)
+ as->urb->interval = 1 <<
+ min(15, ep->desc.bInterval - 1);
+ else
+ as->urb->interval = ep->desc.bInterval;
+ }
+
as->urb->context = as;
as->urb->complete = async_completed;
for (totlen = u = 0; u < uurb->number_of_packets; u++) {
