Hi Jon, Please help to double check if the USB host controller of your Terga platform had been powered OFF while running the ax88772_suspend() routine or not?
--- Best regards, Allan Chou -----Original Message----- From: Jon Hunter [mailto:[email protected]] Sent: Monday, November 14, 2016 5:34 PM To: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected] Subject: Re: [PATCH v3 3/5] net: asix: Fix AX88772x resume failures Hi Allan, On 14/11/16 08:50, ASIX_Allan [Home] wrote: > It seems the AX88772x dongle had been unexpectedly removed while > running the > ax88772_suspend() routine. If yes, you might see these error messages > because the hardware had been absent. In my case the hardware was never removed. The boards are in a test fixture that are not touched. This is seen on more than one board. By reverting this change I no longer see the error messages and appears to be 100% reproducible. Jon -- nvpublic
