This add pinctrl support for Rockchip RK1108 Soc.
Signed-off-by: Andy Yan <andy....@rock-chips.com>
Reviewed-by: Heiko Stuebner <he...@sntech.de>
Series-changes: 2
- add pull and drive-strength functionality
Series-changes: 3
- two minor CodingStyle fixes adviced by Heiko
---
drivers/pinctrl/pinctrl-rockchip.c | 86 ++++++++++++++++++++++++++++++++++++++
1 file changed, 86 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-rockchip.c
b/drivers/pinctrl/pinctrl-rockchip.c
index 49bf7dc..08765f5 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -59,6 +59,7 @@
#define GPIO_LS_SYNC 0x60
enum rockchip_pinctrl_type {
+ RK1108,
RK2928,
RK3066B,
RK3188,
@@ -624,6 +625,65 @@ static int rockchip_set_mux(struct rockchip_pin_bank
*bank, int pin, int mux)
return ret;
}
+#define RK1108_PULL_PMU_OFFSET 0x10
+#define RK1108_PULL_OFFSET 0x110
+#define RK1108_PULL_PINS_PER_REG 8
+#define RK1108_PULL_BITS_PER_PIN 2
+#define RK1108_PULL_BANK_STRIDE 16
+
+static void rk1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
+ int pin_num, struct regmap **regmap,
+ int *reg, u8 *bit)
+{
+ struct rockchip_pinctrl *info = bank->drvdata;
+
+ /* The first 24 pins of the first bank are located in PMU */
+ if (bank->bank_num == 0) {
+ *regmap = info->regmap_pmu;
+ *reg = RK1108_PULL_PMU_OFFSET;
+ } else {
+ *reg = RK1108_PULL_OFFSET;
+ *regmap = info->regmap_base;
+ /* correct the offset, as we're starting with the 2nd bank */
+ *reg -= 0x10;
+ *reg += bank->bank_num * RK1108_PULL_BANK_STRIDE;
+ }
+
+ *reg += ((pin_num / RK1108_PULL_PINS_PER_REG) * 4);
+ *bit = (pin_num % RK1108_PULL_PINS_PER_REG);
+ *bit *= RK1108_PULL_BITS_PER_PIN;
+}
+
+#define RK1108_DRV_PMU_OFFSET 0x20
+#define RK1108_DRV_GRF_OFFSET 0x210
+#define RK1108_DRV_BITS_PER_PIN 2
+#define RK1108_DRV_PINS_PER_REG 8
+#define RK1108_DRV_BANK_STRIDE 16
+
+static void rk1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
+ int pin_num, struct regmap **regmap,
+ int *reg, u8 *bit)
+{
+ struct rockchip_pinctrl *info = bank->drvdata;
+
+ /* The first 24 pins of the first bank are located in PMU */
+ if (bank->bank_num == 0) {
+ *regmap = info->regmap_pmu;
+ *reg = RK1108_DRV_PMU_OFFSET;
+ } else {
+ *regmap = info->regmap_base;
+ *reg = RK1108_DRV_GRF_OFFSET;
+
+ /* correct the offset, as we're starting with the 2nd bank */
+ *reg -= 0x10;
+ *reg += bank->bank_num * RK1108_DRV_BANK_STRIDE;
+ }
+
+ *reg += ((pin_num / RK1108_DRV_PINS_PER_REG) * 4);
+ *bit = pin_num % RK1108_DRV_PINS_PER_REG;
+ *bit *= RK1108_DRV_BITS_PER_PIN;
+}
+
#define RK2928_PULL_OFFSET 0x118
#define RK2928_PULL_PINS_PER_REG 16
#define RK2928_PULL_BANK_STRIDE 8
@@ -1123,6 +1183,7 @@ static int rockchip_get_pull(struct rockchip_pin_bank
*bank, int pin_num)
return !(data & BIT(bit))
? PIN_CONFIG_BIAS_PULL_PIN_DEFAULT
: PIN_CONFIG_BIAS_DISABLE;
+ case RK1108:
case RK3188:
case RK3288:
case RK3368:
@@ -1169,6 +1230,7 @@ static int rockchip_set_pull(struct rockchip_pin_bank
*bank,
spin_unlock_irqrestore(&bank->slock, flags);
break;
+ case RK1108:
case RK3188:
case RK3288:
case RK3368:
@@ -1358,6 +1420,7 @@ static bool rockchip_pinconf_pull_valid(struct
rockchip_pin_ctrl *ctrl,
pull == PIN_CONFIG_BIAS_DISABLE);
case RK3066B:
return pull ? false : true;
+ case RK1108:
case RK3188:
case RK3288:
case RK3368:
@@ -2455,6 +2518,27 @@ static int rockchip_pinctrl_probe(struct platform_device
*pdev)
return 0;
}
+static struct rockchip_pin_bank rk1108_pin_banks[] = {
+ PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU,
+ IOMUX_SOURCE_PMU,
+ IOMUX_SOURCE_PMU,
+ IOMUX_SOURCE_PMU),
+ PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0),
+ PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, 0),
+ PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, 0),
+};
+
+static struct rockchip_pin_ctrl rk1108_pin_ctrl = {
+ .pin_banks = rk1108_pin_banks,
+ .nr_banks = ARRAY_SIZE(rk1108_pin_banks),
+ .label = "RK1108-GPIO",
+ .type = RK1108,
+ .grf_mux_offset = 0x10,
+ .pmu_mux_offset = 0x0,
+ .pull_calc_reg = rk1108_calc_pull_reg_and_bit,
+ .drv_calc_reg = rk1108_calc_drv_reg_and_bit,
+};
+
static struct rockchip_pin_bank rk2928_pin_banks[] = {
PIN_BANK(0, 32, "gpio0"),
PIN_BANK(1, 32, "gpio1"),
@@ -2684,6 +2768,8 @@ static struct rockchip_pin_ctrl rk3399_pin_ctrl = {
};
static const struct of_device_id rockchip_pinctrl_dt_match[] = {
+ { .compatible = "rockchip,rk1108-pinctrl",
+ .data = (void *)&rk1108_pin_ctrl },
{ .compatible = "rockchip,rk2928-pinctrl",
.data = (void *)&rk2928_pin_ctrl },
{ .compatible = "rockchip,rk3036-pinctrl",
--
2.7.4
