Hi! > I instrumented 2.6.21-rc1 base/power/resume.c device_resume() with > TRACE_RESUME(0) as the last statement in the function. Sure enough it > was the last hash value in the RTC after a hard reboot when resume failed: > > [ 12.028820] hash matches drivers/base/power/resume.c:104 > > The machine appears to be absolutely wedged after initiating resume by > pressing the power button. The disk flashes for a half second or so, > then thats it. > > It is a Dell XPS, BIOS rev A04. I'm using 'echo 1 > /sys/power/pm_trace; > echo mem > /sys/power/state' to initiate the S2R sequence. > > Any suggestions on where to go from here?
Did it work ok in 2.6.20? Can you try to get video working/get serial console/something? Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/