Commit 700a38b27eef ("Input: gpio_keys - switch to using generic device
properties") switched to use generic device properties for GPIO keys and
commit 5feeca3c1e39 ("Input: gpio_keys - add support for GPIO descriptors")
switched from legacy GPIO numbers to GPIO descriptors.

Previously devm_gpio_request_one was explicitly passed GPIOF_DIR_IN flag
to set the GPIO direction as input. However devm_get_gpiod_from_child
doesn't have such provisions and hence fwnode_get_named_gpiod can't set
it as input.

This breaks few platforms with the following error:
" gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ
  unable to lock HW IRQ <n> for IRQ
  genirq: Failed to request resources for POWER (irq <x>) on irqchip
  gpio_keys: Unable to claim irq <x>; error -22
  gpio-keys: probe failed with error -22 "

This patch fixes the issue by setting input direction explicitly for
gpio input keys. It also remove the existing GPIOF_DIR_IN flag setting
for the legacy gpios and merges into single gpiod_direction_input call.

Fixes: 700a38b27eef ("Input: gpio_keys - switch to using generic device 
properties")
Cc: Dmitry Torokhov <dmitry.torok...@gmail.com>
Cc: Linus Walleij <linus.wall...@linaro.org>
Cc: Geert Uytterhoeven <geert+rene...@glider.be>
Cc: Mika Westerberg <mika.westerb...@linux.intel.com>
Signed-off-by: Sudeep Holla <sudeep.ho...@arm.com>
---
 drivers/input/keyboard/gpio_keys.c        | 10 +++++++++-
 drivers/input/keyboard/gpio_keys_polled.c | 10 +++++++++-
 2 files changed, 18 insertions(+), 2 deletions(-)

v2->v3:
        - Added error handling and error message

diff --git a/drivers/input/keyboard/gpio_keys.c 
b/drivers/input/keyboard/gpio_keys.c
index 5576f2ae0b71..ed38a05b3039 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -502,7 +502,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
                 * Legacy GPIO number, so request the GPIO here and
                 * convert it to descriptor.
                 */
-               unsigned flags = GPIOF_IN;
+               unsigned flags = 0;

                if (button->active_low)
                        flags |= GPIOF_ACTIVE_LOW;
@@ -521,6 +521,14 @@ static int gpio_keys_setup_key(struct platform_device 
*pdev,
        }

        if (bdata->gpiod) {
+               /* set the GPIO direction to input */
+               error = gpiod_direction_input(bdata->gpiod);
+               if (error) {
+                       dev_err(dev, "Failed to configure GPIO %d as input, 
error %d\n",
+                               desc_to_gpio(bdata->gpiod), error);
+                       return error;
+               }
+
                if (button->debounce_interval) {
                        error = gpiod_set_debounce(bdata->gpiod,
                                        button->debounce_interval * 1000);
diff --git a/drivers/input/keyboard/gpio_keys_polled.c 
b/drivers/input/keyboard/gpio_keys_polled.c
index 72b350315d43..4bd8a015cf5f 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -319,7 +319,7 @@ static int gpio_keys_polled_probe(struct platform_device 
*pdev)
                         * Legacy GPIO number so request the GPIO here and
                         * convert it to descriptor.
                         */
-                       unsigned flags = GPIOF_IN;
+                       unsigned flags = 0;

                        if (button->active_low)
                                flags |= GPIOF_ACTIVE_LOW;
@@ -342,6 +342,14 @@ static int gpio_keys_polled_probe(struct platform_device 
*pdev)
                        }
                }

+               /* set the GPIO direction to input */
+               error = gpiod_direction_input(bdata->gpiod);
+               if (error) {
+                       dev_err(dev, "Failed to configure GPIO %d as input, 
error %d\n",
+                               desc_to_gpio(bdata->gpiod), error);
+                       return error;
+               }
+
                bdata->last_state = -1;
                bdata->threshold = DIV_ROUND_UP(button->debounce_interval,
                                                pdata->poll_interval);
--
2.7.4

Reply via email to