On 19 November 2016 18:38:49 GMT+00:00, Dmitry Torokhov 
<[email protected]> wrote:
>On Sat, Nov 12, 2016 at 02:19:30PM +0000, Jonathan Cameron wrote:
>> On 12/11/16 14:04, Jonathan Cameron wrote:
>> > On 11/11/16 19:02, H. Nikolaus Schaller wrote:
>> >> The tsc2007 chip not only has a resistive touch screen controller
>but
>> >> also an external AUX adc imput which can be used for an ambient
>> >> light sensor, battery voltage monitoring or any general purpose.
>> >>
>> >> Additionally it can measure the chip temperature.
>> >>
>> >> This extension provides an iio interface for these adc channels.
>> >>
>> >> Since it is not wasting much resources and is very
>straightforward,
>> >> we simply provide all other adc channels as optional iio
>interfaces
>> >> as weel. This can be used for debugging or special applications.
>> >>
>> >> This patch also splits the tsc2007 driver in several source files:
>> >> tsc2007.h -- constants, structs and stubs
>> >> tsc2007_core.c -- functional parts of the original driver
>> >> tsc2007_iio.c -- the optional iio stuff
>> >>
>> >> Makefile magic allows to conditionally link the iio
>> >> stuff if CONFIG_IIO=y in a way that it works with
>> >> CONFIG_TOUCHSCREEN_TSC2007=m.
>> >>
>> > 
>> > I ran a quick build test and it blows up in a number of ways
>related to
>> > the #ifdef CONFIG_IIO.
>> > 
>> > I'm not entirely sure why but
>> > #if IS_ENABLED(CONFIG_IIO) works fine.
>> Ah, I'm being sleepy today.  It's because I'm building IIO as a
>module
>> and the symbol defined would therefore be CONFIG_IIO_MODULE.
>> 
>> The IS_ENABLED macro takes care of both cases.
>
>No it doesn't. Have you tried building the driver into the kernel with
>IIO as a module?
Fair point. Is there a clean way of handling this?
>
>> > 
>> > Otherwise looks good to me
>> >> Signed-off-by: H. Nikolaus Schaller <[email protected]>
>> > Reviewed-by: Jonathan Cameron <[email protected]>
>> >> ---
>> >>  drivers/input/touchscreen/Makefile                 |   2 +
>> >>  drivers/input/touchscreen/tsc2007.h                | 118
>++++++++++++++++
>> >>  .../touchscreen/{tsc2007.c => tsc2007_core.c}      | 119
>++++++----------
>> >>  drivers/input/touchscreen/tsc2007_iio.c            | 152
>+++++++++++++++++++++
>> >>  4 files changed, 310 insertions(+), 81 deletions(-)
>> >>  create mode 100644 drivers/input/touchscreen/tsc2007.h
>> >>  rename drivers/input/touchscreen/{tsc2007.c => tsc2007_core.c}
>(85%)
>> >>  create mode 100644 drivers/input/touchscreen/tsc2007_iio.c
>> >>
>> >> diff --git a/drivers/input/touchscreen/Makefile
>b/drivers/input/touchscreen/Makefile
>> >> index 81b8645..d932e2d 100644
>> >> --- a/drivers/input/touchscreen/Makefile
>> >> +++ b/drivers/input/touchscreen/Makefile
>> >> @@ -80,6 +80,8 @@ obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO)     += tsc40.o
>> >>  obj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE)   += tsc200x-core.o
>> >>  obj-$(CONFIG_TOUCHSCREEN_TSC2004)        += tsc2004.o
>> >>  obj-$(CONFIG_TOUCHSCREEN_TSC2005)        += tsc2005.o
>> >> +tsc2007-y                                := tsc2007_core.o
>> >> +tsc2007-$(CONFIG_IIO)                    += tsc2007_iio.o
>> >>  obj-$(CONFIG_TOUCHSCREEN_TSC2007)        += tsc2007.o
>> >>  obj-$(CONFIG_TOUCHSCREEN_UCB1400)        += ucb1400_ts.o
>> >>  obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001)    += wacom_w8001.o
>> >> diff --git a/drivers/input/touchscreen/tsc2007.h
>b/drivers/input/touchscreen/tsc2007.h
>> >> new file mode 100644
>> >> index 0000000..5049bf8
>> >> --- /dev/null
>> >> +++ b/drivers/input/touchscreen/tsc2007.h
>> >> @@ -0,0 +1,118 @@
>> >> +/*
>> >> + * drivers/input/touchscreen/tsc2007.h
>> >> + *
>> >> + * Copyright (c) 2008 MtekVision Co., Ltd.
>> >> + *       Kwangwoo Lee <[email protected]>
>> >> + *
>> >> + * Using code from:
>> >> + *  - ads7846.c
>> >> + *       Copyright (c) 2005 David Brownell
>> >> + *       Copyright (c) 2006 Nokia Corporation
>> >> + *  - corgi_ts.c
>> >> + *       Copyright (C) 2004-2005 Richard Purdie
>> >> + *  - omap_ts.[hc], ads7846.h, ts_osk.c
>> >> + *       Copyright (C) 2002 MontaVista Software
>> >> + *       Copyright (C) 2004 Texas Instruments
>> >> + *       Copyright (C) 2005 Dirk Behme
>> >> + *
>> >> + *  This program is free software; you can redistribute it and/or
>modify
>> >> + *  it under the terms of the GNU General Public License version
>2 as
>> >> + *  published by the Free Software Foundation.
>> >> + */
>> >> +
>> >> +#include <linux/input/touchscreen.h>
>> >> +
>> >> +#define TSC2007_MEASURE_TEMP0            (0x0 << 4)
>> >> +#define TSC2007_MEASURE_AUX              (0x2 << 4)
>> >> +#define TSC2007_MEASURE_TEMP1            (0x4 << 4)
>> >> +#define TSC2007_ACTIVATE_XN              (0x8 << 4)
>> >> +#define TSC2007_ACTIVATE_YN              (0x9 << 4)
>> >> +#define TSC2007_ACTIVATE_YP_XN           (0xa << 4)
>> >> +#define TSC2007_SETUP                    (0xb << 4)
>> >> +#define TSC2007_MEASURE_X                (0xc << 4)
>> >> +#define TSC2007_MEASURE_Y                (0xd << 4)
>> >> +#define TSC2007_MEASURE_Z1               (0xe << 4)
>> >> +#define TSC2007_MEASURE_Z2               (0xf << 4)
>> >> +
>> >> +#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2)
>> >> +#define TSC2007_ADC_ON_IRQ_DIS0          (0x1 << 2)
>> >> +#define TSC2007_ADC_OFF_IRQ_EN           (0x2 << 2)
>> >> +#define TSC2007_ADC_ON_IRQ_DIS1          (0x3 << 2)
>> >> +
>> >> +#define TSC2007_12BIT                    (0x0 << 1)
>> >> +#define TSC2007_8BIT                     (0x1 << 1)
>> >> +
>> >> +#define  MAX_12BIT                       ((1 << 12) - 1)
>> >> +
>> >> +#define ADC_ON_12BIT     (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)
>> >> +
>> >> +#define READ_Y           (ADC_ON_12BIT | TSC2007_MEASURE_Y)
>> >> +#define READ_Z1          (ADC_ON_12BIT | TSC2007_MEASURE_Z1)
>> >> +#define READ_Z2          (ADC_ON_12BIT | TSC2007_MEASURE_Z2)
>> >> +#define READ_X           (ADC_ON_12BIT | TSC2007_MEASURE_X)
>> >> +#define PWRDOWN          (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
>> >> +
>> >> +struct ts_event {
>> >> + u16     x;
>> >> + u16     y;
>> >> + u16     z1, z2;
>> >> +};
>> >> +
>> >> +struct tsc2007 {
>> >> + struct input_dev        *input;
>> >> + char                    phys[32];
>> >> +
>> >> + struct i2c_client       *client;
>> >> +
>> >> + u16                     model;
>> >> + u16                     x_plate_ohms;
>> >> +
>> >> + struct touchscreen_properties prop;
>> >> +
>> >> + bool                    report_resistance;
>> >> + u16                     min_x;
>> >> + u16                     min_y;
>> >> + u16                     max_x;
>> >> + u16                     max_y;
>> >> + u16                     max_rt;
>> >> + unsigned long           poll_period; /* in jiffies */
>> >> + int                     fuzzx;
>> >> + int                     fuzzy;
>> >> + int                     fuzzz;
>> >> +
>> >> + unsigned int            gpio;
>> >> + int                     irq;
>> >> +
>> >> + wait_queue_head_t       wait;
>> >> + bool                    stopped;
>> >> + bool                    pendown;
>> >> +
>> >> + int                     (*get_pendown_state)(struct device *);
>> >> + void                    (*clear_penirq)(void);
>> >> +
>> >> + struct mutex            mlock;
>> >> + struct iio_dev          *iio_dev;       /* optional */
>> >> +};
>> >> +
>> >> +int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd);
>> >> +u32 tsc2007_calculate_resistance(struct tsc2007 *tsc,
>> >> +                                 struct ts_event *tc);
>> >> +bool tsc2007_is_pen_down(struct tsc2007 *ts);
>> >> +
>> >> +#ifdef CONFIG_IIO
>> >> +
>> >> +/* defined in tsc2007_iio.c */
>> >> +int tsc2007_iio_configure(struct tsc2007 *ts);
>> >> +void tsc2007_iio_unconfigure(struct tsc2007 *ts);
>> >> +
>> >> +#else /* CONFIG_IIO */
>> >> +
>> >> +static inline int tsc2007_iio_configure(struct tsc2007 *ts)
>> >> +{
>> >> + return 0;
>> >> +}
>> >> +static inline void tsc2007_iio_unconfigure(struct tsc2007 *ts)
>> >> +{
>> >> +}
>> >> +
>> >> +#endif /* CONFIG_IIO */
>> >> diff --git a/drivers/input/touchscreen/tsc2007.c
>b/drivers/input/touchscreen/tsc2007_core.c
>> >> similarity index 85%
>> >> rename from drivers/input/touchscreen/tsc2007.c
>> >> rename to drivers/input/touchscreen/tsc2007_core.c
>> >> index 5e3c4bf..72775ae 100644
>> >> --- a/drivers/input/touchscreen/tsc2007.c
>> >> +++ b/drivers/input/touchscreen/tsc2007_core.c
>> >> @@ -27,80 +27,10 @@
>> >>  #include <linux/i2c.h>
>> >>  #include <linux/i2c/tsc2007.h>
>> >>  #include <linux/of_device.h>
>> >> -#include <linux/of.h>
>> >>  #include <linux/of_gpio.h>
>> >> -#include <linux/input/touchscreen.h>
>> >> -
>> >> -#define TSC2007_MEASURE_TEMP0            (0x0 << 4)
>> >> -#define TSC2007_MEASURE_AUX              (0x2 << 4)
>> >> -#define TSC2007_MEASURE_TEMP1            (0x4 << 4)
>> >> -#define TSC2007_ACTIVATE_XN              (0x8 << 4)
>> >> -#define TSC2007_ACTIVATE_YN              (0x9 << 4)
>> >> -#define TSC2007_ACTIVATE_YP_XN           (0xa << 4)
>> >> -#define TSC2007_SETUP                    (0xb << 4)
>> >> -#define TSC2007_MEASURE_X                (0xc << 4)
>> >> -#define TSC2007_MEASURE_Y                (0xd << 4)
>> >> -#define TSC2007_MEASURE_Z1               (0xe << 4)
>> >> -#define TSC2007_MEASURE_Z2               (0xf << 4)
>> >> -
>> >> -#define TSC2007_POWER_OFF_IRQ_EN (0x0 << 2)
>> >> -#define TSC2007_ADC_ON_IRQ_DIS0          (0x1 << 2)
>> >> -#define TSC2007_ADC_OFF_IRQ_EN           (0x2 << 2)
>> >> -#define TSC2007_ADC_ON_IRQ_DIS1          (0x3 << 2)
>> >> -
>> >> -#define TSC2007_12BIT                    (0x0 << 1)
>> >> -#define TSC2007_8BIT                     (0x1 << 1)
>> >> -
>> >> -#define  MAX_12BIT                       ((1 << 12) - 1)
>> >> -
>> >> -#define ADC_ON_12BIT     (TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)
>> >> -
>> >> -#define READ_Y           (ADC_ON_12BIT | TSC2007_MEASURE_Y)
>> >> -#define READ_Z1          (ADC_ON_12BIT | TSC2007_MEASURE_Z1)
>> >> -#define READ_Z2          (ADC_ON_12BIT | TSC2007_MEASURE_Z2)
>> >> -#define READ_X           (ADC_ON_12BIT | TSC2007_MEASURE_X)
>> >> -#define PWRDOWN          (TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
>> >> -
>> >> -struct ts_event {
>> >> - u16     x;
>> >> - u16     y;
>> >> - u16     z1, z2;
>> >> -};
>> >> -
>> >> -struct tsc2007 {
>> >> - struct input_dev        *input;
>> >> - char                    phys[32];
>> >> -
>> >> - struct i2c_client       *client;
>> >> -
>> >> - u16                     model;
>> >> - u16                     x_plate_ohms;
>> >> -
>> >> - struct touchscreen_properties prop;
>> >> -
>> >> - bool                    report_resistance;
>> >> - u16                     min_x;
>> >> - u16                     min_y;
>> >> - u16                     max_x;
>> >> - u16                     max_y;
>> >> - u16                     max_rt;
>> >> - unsigned long           poll_period; /* in jiffies */
>> >> - int                     fuzzx;
>> >> - int                     fuzzy;
>> >> - int                     fuzzz;
>> >> +#include "tsc2007.h"
>> >>  
>> >> - unsigned                gpio;
>> >> - int                     irq;
>> >> -
>> >> - wait_queue_head_t       wait;
>> >> - bool                    stopped;
>> >> - bool                    pendown;
>> >> -
>> >> - int                     (*get_pendown_state)(struct device *);
>> >> - void                    (*clear_penirq)(void);
>> >> -};
>> >> -
>> >> -static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd)
>> >> +int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd)
>> >>  {
>> >>   s32 data;
>> >>   u16 val;
>> >> @@ -121,6 +51,7 @@ static inline int tsc2007_xfer(struct tsc2007
>*tsc, u8 cmd)
>> >>  
>> >>   return val;
>> >>  }
>> >> +EXPORT_SYMBOL(tsc2007_xfer);
>> >>  
>> >>  static void tsc2007_read_values(struct tsc2007 *tsc, struct
>ts_event *tc)
>> >>  {
>> >> @@ -138,7 +69,7 @@ static void tsc2007_read_values(struct tsc2007
>*tsc, struct ts_event *tc)
>> >>   tsc2007_xfer(tsc, PWRDOWN);
>> >>  }
>> >>  
>> >> -static u32 tsc2007_calculate_resistance(struct tsc2007 *tsc,
>> >> +u32 tsc2007_calculate_resistance(struct tsc2007 *tsc,
>> >>                                   struct ts_event *tc)
>> >>  {
>> >>   u32 rt = 0;
>> >> @@ -158,8 +89,9 @@ static u32 tsc2007_calculate_resistance(struct
>tsc2007 *tsc,
>> >>  
>> >>   return rt;
>> >>  }
>> >> +EXPORT_SYMBOL(tsc2007_calculate_resistance);
>> >>  
>> >> -static bool tsc2007_is_pen_down(struct tsc2007 *ts)
>> >> +bool tsc2007_is_pen_down(struct tsc2007 *ts)
>> >>  {
>> >>   /*
>> >>    * NOTE: We can't rely on the pressure to determine the pen down
>> >> @@ -180,6 +112,7 @@ static bool tsc2007_is_pen_down(struct tsc2007
>*ts)
>> >>  
>> >>   return ts->get_pendown_state(&ts->client->dev);
>> >>  }
>> >> +EXPORT_SYMBOL(tsc2007_is_pen_down);
>> >>  
>> >>  static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
>> >>  {
>> >> @@ -192,7 +125,10 @@ static irqreturn_t tsc2007_soft_irq(int irq,
>void *handle)
>> >>   while (!ts->stopped && tsc2007_is_pen_down(ts)) {
>> >>  
>> >>           /* pen is down, continue with the measurement */
>> >> +
>> >> +         mutex_lock(&ts->mlock);
>> >>           tsc2007_read_values(ts, &tc);
>> >> +         mutex_unlock(&ts->mlock);
>> >>  
>> >>           rt = tsc2007_calculate_resistance(ts, &tc);
>> >>  
>> >> @@ -450,7 +386,8 @@ static void tsc2007_call_exit_platform_hw(void
>*data)
>> >>  static int tsc2007_probe(struct i2c_client *client,
>> >>                    const struct i2c_device_id *id)
>> >>  {
>> >> - const struct tsc2007_platform_data *pdata =
>dev_get_platdata(&client->dev);
>> >> + const struct tsc2007_platform_data *pdata =
>> >> +         dev_get_platdata(&client->dev);
>> >>   struct tsc2007 *ts;
>> >>   struct input_dev *input_dev;
>> >>   int err;
>> >> @@ -472,7 +409,13 @@ static int tsc2007_probe(struct i2c_client
>*client,
>> >>   ts->client = client;
>> >>   ts->irq = client->irq;
>> >>   ts->input = input_dev;
>> >> +
>> >> + err = tsc2007_iio_configure(ts);
>> >> + if (err < 0)
>> >> +         return err;
>> >> +
>> >>   init_waitqueue_head(&ts->wait);
>> >> + mutex_init(&ts->mlock);
>> >>  
>> >>   snprintf(ts->phys, sizeof(ts->phys),
>> >>            "%s/input0", dev_name(&client->dev));
>> >> @@ -494,7 +437,7 @@ static int tsc2007_probe(struct i2c_client
>*client,
>> >>   if (pdata) {
>> >>           err = tsc2007_probe_pdev(client, ts, pdata, id);
>> >>           if (err)
>> >> -                 return err;
>> >> +                 goto probe_err;
>> >>           input_set_abs_params(input_dev, ABS_X, 0, ts->max_x-ts->min_x,
>> >>                                                     ts->fuzzx, 0);
>> >>           input_set_abs_params(input_dev, ABS_Y, 0, ts->max_y-ts->min_y,
>> >> @@ -504,7 +447,7 @@ static int tsc2007_probe(struct i2c_client
>*client,
>> >>   } else {
>> >>           err = tsc2007_probe_dt(client, ts);
>> >>           if (err)
>> >> -                 return err;
>> >> +                 goto probe_err;
>> >>   }
>> >>  
>> >>   if (pdata) {
>> >> @@ -516,7 +459,7 @@ static int tsc2007_probe(struct i2c_client
>*client,
>> >>                           dev_err(&client->dev,
>> >>                                   "Failed to register exit_platform_hw 
>> >> action, %d\n",
>> >>                                   err);
>> >> -                         return err;
>> >> +                         goto probe_err;
>> >>                   }
>> >>           }
>> >>  
>> >> @@ -533,7 +476,7 @@ static int tsc2007_probe(struct i2c_client
>*client,
>> >>   if (err) {
>> >>           dev_err(&client->dev, "Failed to request irq %d: %d\n",
>> >>                   ts->irq, err);
>> >> -         return err;
>> >> +         goto probe_err;
>> >>   }
>> >>  
>> >>   tsc2007_stop(ts);
>> >> @@ -543,17 +486,30 @@ static int tsc2007_probe(struct i2c_client
>*client,
>> >>   if (err < 0) {
>> >>           dev_err(&client->dev,
>> >>                   "Failed to setup chip: %d\n", err);
>> >> -         return err;     /* usually, chip does not respond */
>> >> +         goto probe_err; /* chip does not respond */
>> >>   }
>> >>  
>> >>   err = input_register_device(input_dev);
>> >>   if (err) {
>> >>           dev_err(&client->dev,
>> >>                   "Failed to register input device: %d\n", err);
>> >> -         return err;
>> >> +         goto probe_err;
>> >>   }
>> >>  
>> >>   return 0;
>> >> +
>> >> +probe_err:
>> >> + tsc2007_iio_unconfigure(ts);
>> >> + return err;
>> >> +}
>> >> +
>> >> +static int tsc2007_remove(struct i2c_client *client)
>> >> +{
>> >> + struct tsc2007 *ts = i2c_get_clientdata(client);
>> >> +
>> >> + tsc2007_iio_unconfigure(ts);
>> >> + input_unregister_device(ts->input);
>> >> + return 0;
>> >>  }
>> >>  
>> >>  static const struct i2c_device_id tsc2007_idtable[] = {
>> >> @@ -578,6 +534,7 @@ static struct i2c_driver tsc2007_driver = {
>> >>   },
>> >>   .id_table       = tsc2007_idtable,
>> >>   .probe          = tsc2007_probe,
>> >> + .remove         = tsc2007_remove,
>> >>  };
>> >>  
>> >>  module_i2c_driver(tsc2007_driver);
>> >> diff --git a/drivers/input/touchscreen/tsc2007_iio.c
>b/drivers/input/touchscreen/tsc2007_iio.c
>> >> new file mode 100644
>> >> index 0000000..e492bba
>> >> --- /dev/null
>> >> +++ b/drivers/input/touchscreen/tsc2007_iio.c
>> >> @@ -0,0 +1,152 @@
>> >> +/*
>> >> + * drivers/input/touchscreen/tsc2007_iio.c
>> >> + *
>> >> + * Copyright (c) 2016 Golden Delicious Comp. GmbH&Co. KG
>> >> + *       Nikolaus Schaller <[email protected]>
>> >> + *
>> >> + *  This program is free software; you can redistribute it and/or
>modify
>> >> + *  it under the terms of the GNU General Public License version
>2 as
>> >> + *  published by the Free Software Foundation.
>> >> + */
>> >> +
>> >> +#include <linux/i2c.h>
>> >> +#include <linux/iio/iio.h>
>> >> +#include "tsc2007.h"
>> >> +
>> >> +struct tsc2007_iio {
>> >> + struct tsc2007 *ts;
>> >> +};
>> >> +
>> >> +#define TSC2007_CHAN_IIO(_chan, _name, _type, _chan_info) \
>> >> +{ \
>> >> + .datasheet_name = _name, \
>> >> + .type = _type, \
>> >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |  \
>> >> +                 BIT(_chan_info), \
>> >> + .indexed = 1, \
>> >> + .channel = _chan, \
>> >> +}
>> >> +
>> >> +static const struct iio_chan_spec tsc2007_iio_channel[] = {
>> >> + TSC2007_CHAN_IIO(0, "x", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
>> >> + TSC2007_CHAN_IIO(1, "y", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
>> >> + TSC2007_CHAN_IIO(2, "z1", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
>> >> + TSC2007_CHAN_IIO(3, "z2", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
>> >> + TSC2007_CHAN_IIO(4, "adc", IIO_VOLTAGE, IIO_CHAN_INFO_RAW),
>> >> + TSC2007_CHAN_IIO(5, "rt", IIO_VOLTAGE, IIO_CHAN_INFO_RAW), /*
>Ohms? */
>> >> + TSC2007_CHAN_IIO(6, "pen", IIO_PRESSURE, IIO_CHAN_INFO_RAW),
>> >> + TSC2007_CHAN_IIO(7, "temp0", IIO_TEMP, IIO_CHAN_INFO_RAW),
>> >> + TSC2007_CHAN_IIO(8, "temp1", IIO_TEMP, IIO_CHAN_INFO_RAW),
>> >> +};
>> >> +
>> >> +static int tsc2007_read_raw(struct iio_dev *indio_dev,
>> >> + struct iio_chan_spec const *chan, int *val, int *val2, long
>mask)
>> >> +{
>> >> + struct tsc2007_iio *iio = iio_priv(indio_dev);
>> >> + struct tsc2007 *tsc = iio->ts;
>> >> + int adc_chan = chan->channel;
>> >> + int ret = 0;
>> >> +
>> >> + if (adc_chan >= ARRAY_SIZE(tsc2007_iio_channel))
>> >> +         return -EINVAL;
>> >> +
>> >> + if (mask != IIO_CHAN_INFO_RAW)
>> >> +         return -EINVAL;
>> >> +
>> >> + mutex_lock(&tsc->mlock);
>> >> +
>> >> + switch (chan->channel) {
>> >> + case 0:
>> >> +         *val = tsc2007_xfer(tsc, READ_X);
>> >> +         break;
>> >> + case 1:
>> >> +         *val = tsc2007_xfer(tsc, READ_Y);
>> >> +         break;
>> >> + case 2:
>> >> +         *val = tsc2007_xfer(tsc, READ_Z1);
>> >> +         break;
>> >> + case 3:
>> >> +         *val = tsc2007_xfer(tsc, READ_Z2);
>> >> +         break;
>> >> + case 4:
>> >> +         *val = tsc2007_xfer(tsc, (ADC_ON_12BIT | TSC2007_MEASURE_AUX));
>> >> +         break;
>> >> + case 5: {
>> >> +         struct ts_event tc;
>> >> +
>> >> +         tc.x = tsc2007_xfer(tsc, READ_X);
>> >> +         tc.z1 = tsc2007_xfer(tsc, READ_Z1);
>> >> +         tc.z2 = tsc2007_xfer(tsc, READ_Z2);
>> >> +         *val = tsc2007_calculate_resistance(tsc, &tc);
>> >> +         break;
>> >> + }
>> >> + case 6:
>> >> +         *val = tsc2007_is_pen_down(tsc);
>> >> +         break;
>> >> + case 7:
>> >> +         *val = tsc2007_xfer(tsc,
>> >> +                             (ADC_ON_12BIT | TSC2007_MEASURE_TEMP0));
>> >> +         break;
>> >> + case 8:
>> >> +         *val = tsc2007_xfer(tsc,
>> >> +                             (ADC_ON_12BIT | TSC2007_MEASURE_TEMP1));
>> >> +         break;
>> >> + }
>> >> +
>> >> + /* Prepare for next touch reading - power down ADC, enable
>PENIRQ */
>> >> + tsc2007_xfer(tsc, PWRDOWN);
>> >> +
>> >> + mutex_unlock(&tsc->mlock);
>> >> +
>> >> + ret = IIO_VAL_INT;
>> >> +
>> >> + return ret;
>> >> +}
>> >> +
>> >> +static const struct iio_info tsc2007_iio_info = {
>> >> + .read_raw = tsc2007_read_raw,
>> >> + .driver_module = THIS_MODULE,
>> >> +};
>> >> +
>> >> +int tsc2007_iio_configure(struct tsc2007 *ts)
>> >> +{
>> >> + int err;
>> >> + struct iio_dev *indio_dev;
>> >> + struct tsc2007_iio *iio;
>> >> +
>> >> + indio_dev = devm_iio_device_alloc(&ts->client->dev,
>> >> +         sizeof(struct tsc2007_iio));
>> >> + if (!indio_dev) {
>> >> +         dev_err(&ts->client->dev, "iio_device_alloc failed\n");
>> >> +         return -ENOMEM;
>> >> + }
>> >> +
>> >> + iio = iio_priv(indio_dev);
>> >> + iio->ts = ts;
>> >> + ts->iio_dev = (void *) indio_dev;
>> >> +
>> >> + indio_dev->name = "tsc2007";
>> >> + indio_dev->dev.parent = &ts->client->dev;
>> >> + indio_dev->info = &tsc2007_iio_info;
>> >> + indio_dev->modes = INDIO_DIRECT_MODE;
>> >> + indio_dev->channels = tsc2007_iio_channel;
>> >> + indio_dev->num_channels = ARRAY_SIZE(tsc2007_iio_channel);
>> >> +
>> >> + err = iio_device_register(indio_dev);
>> >> + if (err < 0) {
>> >> +         dev_err(&ts->client->dev, "iio_device_register() failed: %d\n",
>> >> +                 err);
>> >> +         return err;
>> >> + }
>> >> +
>> >> + return 0;
>> >> +}
>> >> +EXPORT_SYMBOL(tsc2007_iio_configure);
>> >> +
>> >> +void tsc2007_iio_unconfigure(struct tsc2007 *ts)
>> >> +{
>> >> + struct iio_dev *indio_dev = ts->iio_dev;
>> >> +
>> >> + iio_device_unregister(indio_dev);
>> >> +}
>> >> +EXPORT_SYMBOL(tsc2007_iio_unconfigure);
>> >>
>> > 
>> > --
>> > To unsubscribe from this list: send the line "unsubscribe
>linux-iio" in
>> > the body of a message to [email protected]
>> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> > 
>> 

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.

Reply via email to