On Tue, Nov 15, 2016 at 10:38:23PM +0000, Nick Dyer wrote:
> On Mon, Nov 14, 2016 at 09:39:37PM -0800, Guenter Roeck wrote:
> > Sensor tuning support is needed to determine the number of enabled
> > tx and rx electrodes for use in F54 functions.
> > 
> > The number of enabled electrodes is not identical to the total number
> > of electrodes as reported with F55:Query0 and F55:Query1. It has to be
> > calculated by analyzing F55:Ctrl1 (sensor receiver assignment) and
> > F55:Ctrl2 (sensor transmitter assignment).
> > 
> > Support for additional sensor tuning functions may be added later.
> > 
> > Fixes: 3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 
> > ...")
> > Signed-off-by: Guenter Roeck <li...@roeck-us.net>
> 
> Hi Guenter-
> 
> I've tested this patch on s7813 and it works correctly.
> 
> Tested-by: Nick Dyer <n...@shmanahar.org>

Applied, thank you.

> 
> > ---
> > v2: Drop unnecessary include files
> >     Only read required number of query elements
> >     Added Fixes: tag (both patch 1 and 2 are needed)
> > 
> >  drivers/input/rmi4/Kconfig      |   9 +++
> >  drivers/input/rmi4/Makefile     |   1 +
> >  drivers/input/rmi4/rmi_bus.c    |   3 +
> >  drivers/input/rmi4/rmi_driver.h |   1 +
> >  drivers/input/rmi4/rmi_f55.c    | 124 
> > ++++++++++++++++++++++++++++++++++++++++
> >  5 files changed, 138 insertions(+)
> >  create mode 100644 drivers/input/rmi4/rmi_f55.c
> > 
> > diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig
> > index 4c8a55857e00..11ede43c9936 100644
> > --- a/drivers/input/rmi4/Kconfig
> > +++ b/drivers/input/rmi4/Kconfig
> > @@ -72,3 +72,12 @@ config RMI4_F54
> >  
> >       Function 54 provides access to various diagnostic features in certain
> >       RMI4 touch sensors.
> > +
> > +config RMI4_F55
> > +   bool "RMI4 Function 55 (Sensor tuning)"
> > +   depends on RMI4_CORE
> > +   help
> > +     Say Y here if you want to add support for RMI4 function 55
> > +
> > +     Function 55 provides access to the RMI4 touch sensor tuning
> > +     mechanism.
> > diff --git a/drivers/input/rmi4/Makefile b/drivers/input/rmi4/Makefile
> > index 0bafc8502c4b..96f8e0c21e3b 100644
> > --- a/drivers/input/rmi4/Makefile
> > +++ b/drivers/input/rmi4/Makefile
> > @@ -8,6 +8,7 @@ rmi_core-$(CONFIG_RMI4_F11) += rmi_f11.o
> >  rmi_core-$(CONFIG_RMI4_F12) += rmi_f12.o
> >  rmi_core-$(CONFIG_RMI4_F30) += rmi_f30.o
> >  rmi_core-$(CONFIG_RMI4_F54) += rmi_f54.o
> > +rmi_core-$(CONFIG_RMI4_F55) += rmi_f55.o
> >  
> >  # Transports
> >  obj-$(CONFIG_RMI4_I2C) += rmi_i2c.o
> > diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c
> > index ef8c747c35e7..82b7d4960858 100644
> > --- a/drivers/input/rmi4/rmi_bus.c
> > +++ b/drivers/input/rmi4/rmi_bus.c
> > @@ -314,6 +314,9 @@ static struct rmi_function_handler *fn_handlers[] = {
> >  #ifdef CONFIG_RMI4_F54
> >     &rmi_f54_handler,
> >  #endif
> > +#ifdef CONFIG_RMI4_F55
> > +   &rmi_f55_handler,
> > +#endif
> >  };
> >  
> >  static void __rmi_unregister_function_handlers(int start_idx)
> > diff --git a/drivers/input/rmi4/rmi_driver.h 
> > b/drivers/input/rmi4/rmi_driver.h
> > index 8dfbebe9bf86..a65cf70f61e2 100644
> > --- a/drivers/input/rmi4/rmi_driver.h
> > +++ b/drivers/input/rmi4/rmi_driver.h
> > @@ -103,4 +103,5 @@ extern struct rmi_function_handler rmi_f11_handler;
> >  extern struct rmi_function_handler rmi_f12_handler;
> >  extern struct rmi_function_handler rmi_f30_handler;
> >  extern struct rmi_function_handler rmi_f54_handler;
> > +extern struct rmi_function_handler rmi_f55_handler;
> >  #endif
> > diff --git a/drivers/input/rmi4/rmi_f55.c b/drivers/input/rmi4/rmi_f55.c
> > new file mode 100644
> > index 000000000000..2d221cc97391
> > --- /dev/null
> > +++ b/drivers/input/rmi4/rmi_f55.c
> > @@ -0,0 +1,124 @@
> > +/*
> > + * Copyright (c) 2012-2015 Synaptics Incorporated
> > + * Copyright (C) 2016 Zodiac Inflight Innovations
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms of the GNU General Public License version 2 as 
> > published by
> > + * the Free Software Foundation.
> > + */
> > +
> > +#include <linux/bitops.h>
> > +#include <linux/kernel.h>
> > +#include <linux/rmi.h>
> > +#include <linux/slab.h>
> > +#include "rmi_driver.h"
> > +
> > +#define F55_NAME           "rmi4_f55"
> > +
> > +/* F55 data offsets */
> > +#define F55_NUM_RX_OFFSET  0
> > +#define F55_NUM_TX_OFFSET  1
> > +#define F55_PHYS_CHAR_OFFSET       2
> > +
> > +/* Only read required query registers */
> > +#define F55_QUERY_LEN              3
> > +
> > +/* F55 capabilities */
> > +#define F55_CAP_SENSOR_ASSIGN      BIT(0)
> > +
> > +struct f55_data {
> > +   struct rmi_function *fn;
> > +
> > +   u8 qry[F55_QUERY_LEN];
> > +   u8 num_rx_electrodes;
> > +   u8 cfg_num_rx_electrodes;
> > +   u8 num_tx_electrodes;
> > +   u8 cfg_num_tx_electrodes;
> > +};
> > +
> > +static int rmi_f55_detect(struct rmi_function *fn)
> > +{
> > +   struct f55_data *f55;
> > +   int error;
> > +
> > +   f55 = dev_get_drvdata(&fn->dev);
> > +
> > +   error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr,
> > +                          &f55->qry, sizeof(f55->qry));
> > +   if (error) {
> > +           dev_err(&fn->dev, "%s: Failed to query F55 properties\n",
> > +                   __func__);
> > +           return error;
> > +   }
> > +
> > +   f55->num_rx_electrodes = f55->qry[F55_NUM_RX_OFFSET];
> > +   f55->num_tx_electrodes = f55->qry[F55_NUM_TX_OFFSET];
> > +
> > +   f55->cfg_num_rx_electrodes = f55->num_rx_electrodes;
> > +   f55->cfg_num_tx_electrodes = f55->num_rx_electrodes;
> > +
> > +   if (f55->qry[F55_PHYS_CHAR_OFFSET] & F55_CAP_SENSOR_ASSIGN) {
> > +           int i, total;
> > +           u8 buf[256];
> > +
> > +           /*
> > +            * Calculate the number of enabled receive and transmit
> > +            * electrodes by reading F55:Ctrl1 (sensor receiver assignment)
> > +            * and F55:Ctrl2 (sensor transmitter assignment). The number of
> > +            * enabled electrodes is the sum of all field entries with a
> > +            * value other than 0xff.
> > +            */
> > +           error = rmi_read_block(fn->rmi_dev,
> > +                                  fn->fd.control_base_addr + 1,
> > +                                  buf, f55->num_rx_electrodes);
> > +           if (!error) {
> > +                   total = 0;
> > +                   for (i = 0; i < f55->num_rx_electrodes; i++) {
> > +                           if (buf[i] != 0xff)
> > +                                   total++;
> > +                   }
> > +                   f55->cfg_num_rx_electrodes = total;
> > +           }
> > +
> > +           error = rmi_read_block(fn->rmi_dev,
> > +                                  fn->fd.control_base_addr + 2,
> > +                                  buf, f55->num_tx_electrodes);
> > +           if (!error) {
> > +                   total = 0;
> > +                   for (i = 0; i < f55->num_tx_electrodes; i++) {
> > +                           if (buf[i] != 0xff)
> > +                                   total++;
> > +                   }
> > +                   f55->cfg_num_tx_electrodes = total;
> > +           }
> > +   }
> > +
> > +   rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F55 num_rx_electrodes: %d (raw %d)\n",
> > +           f55->cfg_num_rx_electrodes, f55->num_rx_electrodes);
> > +   rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F55 num_tx_electrodes: %d (raw %d)\n",
> > +           f55->cfg_num_tx_electrodes, f55->num_tx_electrodes);
> > +
> > +   return 0;
> > +}
> > +
> > +static int rmi_f55_probe(struct rmi_function *fn)
> > +{
> > +   struct f55_data *f55;
> > +
> > +   f55 = devm_kzalloc(&fn->dev, sizeof(struct f55_data), GFP_KERNEL);
> > +   if (!f55)
> > +           return -ENOMEM;
> > +
> > +   f55->fn = fn;
> > +   dev_set_drvdata(&fn->dev, f55);
> > +
> > +   return rmi_f55_detect(fn);
> > +}
> > +
> > +struct rmi_function_handler rmi_f55_handler = {
> > +   .driver = {
> > +           .name = F55_NAME,
> > +   },
> > +   .func = 0x55,
> > +   .probe = rmi_f55_probe,
> > +};
> > -- 
> > 2.5.0
> > 

-- 
Dmitry

Reply via email to