On Tuesday 22 November 2016 09:11 PM, Axel Haslam wrote: > Hi Sekhar > > On Tue, Nov 22, 2016 at 11:37 AM, Sekhar Nori <nsek...@ti.com> wrote: >> On Monday 21 November 2016 10:23 PM, Axel Haslam wrote: >>> The hawk board VBUS is fixed to a 5v source, and the over >>> current pin is actually not connected to the SoC. >>> >>> Do not reseve these gpios for OHCI as they are not related >>> to usb. >>> >>> Signed-off-by: Axel Haslam <ahas...@baylibre.com> >> >> As discussed over the MMC/SD patches, this patch should be based off the >> hawkboard schematic, not the LCDK schematic. >> > > I looked at the hawkboard schematics and they are the same > as the lcdk as far as usb i concerned: > > The ohci vbus is fixed to 5v, and the over current pins of the > TPS are not connected. so this patch should be ok for > both the hawk and the lcdk.
Alright! Thanks for checking. Regards, Sekhar