The camera_supply_dummy_device definition is shared between a780 and a910,
but only provided when the first is enabled and fails to build for a
configuration with only a910:
arch/arm/mach-pxa/ezx.c:1097:3: error: 'camera_supply_dummy_device' undeclared
here (not in a function)
This moves the definition into its own section.
Fixes: 6c1b417adc8f ("ARM: pxa: ezx: use the new pxa_camera platform_data")
Signed-off-by: Arnd Bergmann <a...@arndb.de>
---
arch/arm/mach-pxa/ezx.c | 56 ++++++++++++++++++++++++++-----------------------
1 file changed, 30 insertions(+), 26 deletions(-)
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 0b8300e6fca3..a057cf9c0e7b 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -696,32 +696,7 @@ static struct pxa27x_keypad_platform_data
e2_keypad_platform_data = {
};
#endif /* CONFIG_MACH_EZX_E2 */
-#ifdef CONFIG_MACH_EZX_A780
-/* gpio_keys */
-static struct gpio_keys_button a780_buttons[] = {
- [0] = {
- .code = SW_LID,
- .gpio = GPIO12_A780_FLIP_LID,
- .active_low = 0,
- .desc = "A780 flip lid",
- .type = EV_SW,
- .wakeup = 1,
- },
-};
-
-static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
- .buttons = a780_buttons,
- .nbuttons = ARRAY_SIZE(a780_buttons),
-};
-
-static struct platform_device a780_gpio_keys = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &a780_gpio_keys_platform_data,
- },
-};
-
+#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_A910)
/* camera */
static struct regulator_consumer_supply camera_dummy_supplies[] = {
REGULATOR_SUPPLY("vdd", "0-005d"),
@@ -750,6 +725,35 @@ static struct platform_device camera_supply_dummy_device =
{
.platform_data = &camera_dummy_config,
},
};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A780
+/* gpio_keys */
+static struct gpio_keys_button a780_buttons[] = {
+ [0] = {
+ .code = SW_LID,
+ .gpio = GPIO12_A780_FLIP_LID,
+ .active_low = 0,
+ .desc = "A780 flip lid",
+ .type = EV_SW,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
+ .buttons = a780_buttons,
+ .nbuttons = ARRAY_SIZE(a780_buttons),
+};
+
+static struct platform_device a780_gpio_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &a780_gpio_keys_platform_data,
+ },
+};
+
+/* camera */
static int a780_camera_reset(struct device *dev)
{
gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
--
2.9.0
