In some cases, some sensors didn't need the trip points, the
set_trips will pass {-INT_MAX, INT_MAX} to trigger tsadc alarm in the end,
ignore this case and disable the high temperature interrupt.Signed-off-by: Caesar Wang <w...@rock-chips.com> Reviewed-by: Brian Norris <briannor...@chromium.org> --- Changes in v3: - change the commit. - Fixes something as Brian comments on Changes in v2: - Fixes something as Brian comments on https://patchwork.kernel.org/patch/9440989. Changes in v1: None drivers/thermal/rockchip_thermal.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 660ed3b..56c663c 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -675,7 +675,21 @@ static int rk_tsadcv2_get_temp(const struct chip_tsadc_table *table, static int rk_tsadcv2_alarm_temp(const struct chip_tsadc_table *table, int chn, void __iomem *regs, int temp) { - u32 alarm_value, int_en; + u32 alarm_value; + u32 int_en, int_clr; + + /* + * In some cases, some sensors didn't need the trip points, the + * set_trips will pass {-INT_MAX, INT_MAX} to trigger tsadc alarm + * in the end, ignore this case and disable the high temperature + * interrupt. + */ + if (temp == INT_MAX) { + int_clr = readl_relaxed(regs + TSADCV2_INT_EN); + int_clr &= ~TSADCV2_INT_SRC_EN(chn); + writel_relaxed(int_clr, regs + TSADCV2_INT_EN); + return 0; + } /* Make sure the value is valid */ alarm_value = rk_tsadcv2_temp_to_code(table, temp); -- 2.7.4
