[PATCH 2/3] ARM: dts: at91: sama5d2: move UART3 to DMA1

[Nicolas Ferre]

Now that DMA1 is defined, use it to distribute channel usage among the two
controllers.

Signed-off-by: Nicolas Ferre <nicolas.fe...@atmel.com>
---
 arch/arm/boot/dts/sama5d2.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index c791ce9c750c..5b69eff523d9 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -1151,10 +1151,10 @@
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xfc008000 0x100>;
                                interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
-                               dmas = <&dma0
+                               dmas = <&dma1
                                        (AT91_XDMAC_DT_MEM_IF(0) | 
AT91_XDMAC_DT_PER_IF(1) |
                                         AT91_XDMAC_DT_PERID(41))>,
-                                      <&dma0
+                                      <&dma1
                                        (AT91_XDMAC_DT_MEM_IF(0) | 
AT91_XDMAC_DT_PER_IF(1) |
                                         AT91_XDMAC_DT_PERID(42))>;
                                dma-names = "tx", "rx";
-- 
2.9.0