On 12/6/2016 9:17 AM, Rafał Miłecki wrote:
> From: Rafał Miłecki <[email protected]>
>
> There are 3 separated controllers, one per USB /standard/. With PHY
> drivers in place they can be simply supported with generic drivers.
>
> Signed-off-by: Rafał Miłecki <[email protected]>
> ---
> arch/arm/boot/dts/bcm5301x.dtsi | 33 ++++++++++++++++++++++++++++++++-
> 1 file changed, 32 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
> index f09a2bb..bfc98d19 100644
> --- a/arch/arm/boot/dts/bcm5301x.dtsi
> +++ b/arch/arm/boot/dts/bcm5301x.dtsi
> @@ -248,8 +248,26 @@
>
> #address-cells = <1>;
> #size-cells = <1>;
> + ranges;
>
> - phys = <&usb2_phy>;
> + interrupt-parent = <&gic>;
> +
> + ohci: ohci@21000 {
> + #usb-cells = <0>;
> +
> + compatible = "generic-ohci";
> + reg = <0x00022000 0x1000>;
Your label ohci@21000 does not match the 'reg' at 0x22000.
> + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + ehci: ehci@22000 {
> + #usb-cells = <0>;
> +
> + compatible = "generic-ehci";
> + reg = <0x00021000 0x1000>;
Looks like you got the label of ohci and ehci reversed?
> + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&usb2_phy>;
> + };
> };
>
> usb3: usb3@23000 {
> @@ -257,6 +275,19 @@
>
> #address-cells = <1>;
> #size-cells = <1>;
> + ranges;
> +
> + interrupt-parent = <&gic>;
> +
> + xhci: xhci@23000 {
> + #usb-cells = <0>;
> +
> + compatible = "generic-xhci";
> + reg = <0x00023000 0x1000>;
> + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> + phys = <&usb3_phy>;
> + phy-names = "usb";
> + };
> };
>
> spi@29000 {
>
