Some boards are equipped with simple, GPIO-driven power load switches. An example of such ICs is the TI tps229* series.
Add device tree bindings allowing to describe them. Signed-off-by: Bartosz Golaszewski <[email protected]> --- .../bindings/power/gpio-power-switch.txt | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/gpio-power-switch.txt diff --git a/Documentation/devicetree/bindings/power/gpio-power-switch.txt b/Documentation/devicetree/bindings/power/gpio-power-switch.txt new file mode 100644 index 0000000..21420ed --- /dev/null +++ b/Documentation/devicetree/bindings/power/gpio-power-switch.txt @@ -0,0 +1,25 @@ +GPIO Power Switch +----------------- + +This is the device tree binding for simple, GPIO-driven power load switches +that do not have any control signals. + +Required properties: + +- compatible: must be "gpio-power-switch" +- power-gpios: phandle for the GPIO driving the power load switch + +Optional properties: + +- power-switch-name: the name of the power switch +- power-switch-on: the power switch GPIO is driven high by default + +Example +------- + +acme_probe0_power_switch: gpio_power_switch@0 { + compatible = "gpio-power-switch"; + power-switch-name = "acme_probe0_switch"; + power-gpios = <&pca9535 1 GPIO_ACTIVE_HIGH>; + power-switch-on; +}; -- 2.9.3
