On 12/12/2016 11:18 AM, Neil Armstrong wrote:
> The Amlogic Meson GXBB secure monitor uses part of the memory space, this
> patch adds these reserved zones and redefines the usable memory range for
> each boards.
>
> Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 21
> +++++++++++++++++++++
> .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 2 +-
> .../boot/dts/amlogic/meson-gxbb-vega-s95-meta.dts | 2 +-
> .../boot/dts/amlogic/meson-gxbb-vega-s95-pro.dts | 2 +-
> .../boot/dts/amlogic/meson-gxbb-vega-s95-telos.dts | 2 +-
> .../boot/dts/amlogic/meson-gxl-nexbox-a95x.dts | 2 +-
> .../arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts | 2 +-
> arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 2 +-
> 11 files changed, 31 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> index 7a078be..ac40b2d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> @@ -56,7 +56,7 @@
>
> memory@0 {
> device_type = "memory";
> - reg = <0x0 0x0 0x0 0x80000000>;
> + reg = <0x0 0x1000000 0x0 0x7f000000>;
> };
>
> vddio_boot: regulator-vddio_boot {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> index fc033c0..e085588 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> @@ -55,6 +55,27 @@
> #address-cells = <2>;
> #size-cells = <2>;
>
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + secos: secos {
> + reg = <0x0 0x05300000 0x0 0x2000000>;
> + no-map;
> + };
Hello Neil,
In
https://github.com/hardkernel/linux/blob/odroidc2-3.14.y/arch/arm64/boot/dts/meson64_odroidc2.dts
the secos region does not exist. In linux-next I find no reference to
the secos label. Where is the consumer of the region defined?
> +
> + pstore: pstore {
> + reg = <0x0 0x07300000 0x0 0x100000>;
> + no-map;
> + };
In
https://github.com/hardkernel/linux/blob/odroidc2-3.14.y/arch/arm64/boot/dts/amlogic/gxbb_skt.dts
and other files pstore uses a different position
(reg = <0x0 0x20000000 0x0 0x100000>;).
Why are we moving this?
Should this region be marked
compatible = "ramoops"; ?
Cf. Documentation/devicetree/bindings/reserved-memory/ramoops.txt.
It would be nice if you could add a short description of each reserved
area to the commit message.
Regards
Heinrich Schuchardt
> +
> + secmon: secmon {
> + reg = <0x0 0x10000000 0x0 0x200000>;
> + no-map;
> + };
> + };
> +
> cpus {
> #address-cells = <0x2>;
> #size-cells = <0x0>;
