On 12/14/2016 11:23 AM, Tin Huynh wrote:
ACPI always sets Tx/Rx FIFO to 32. This configuration will cause problem if the IP core supports a FIFO size of less than 32. The driver should read the FIFO size from the IP and select the smaller one of the two.Signed-off-by: Tin Huynh <[email protected]> --- drivers/i2c/busses/i2c-designware-platdrv.c | 31 ++++++++++++++++++++------ 1 files changed, 24 insertions(+), 7 deletions(-)
Acked-by: Jarkko Nikula <[email protected]>
