RE: [PATCH v6 2/4] irqchip/qeic: merge qeic init code from platforms to a common function

[Qiang Zhao]

On 16/12/16 04:33, Marc Zyngier <marc.zyng...@arm.com> wrote:

> -----Original Message-----
> From: Marc Zyngier [mailto:marc.zyng...@arm.com]
> Sent: Friday, December 16, 2016 4:33 PM
> To: Qiang Zhao <qiang.z...@nxp.com>; o...@buserror.net; t...@linutronix.de
> Cc: ja...@lakedaemon.net; Xiaobo Xie <xiaobo....@nxp.com>; linux-
> ker...@vger.kernel.org; linuxppc-...@lists.ozlabs.org
> Subject: Re: [PATCH v6 2/4] irqchip/qeic: merge qeic init code from platforms 
> to
> a common function
> 
> On 28/09/16 04:25, Zhao Qiang wrote:
> > The codes of qe_ic init from a variety of platforms are redundant,
> > merge them to a common function and put it to irqchip/irq-qeic.c
> >
> > For non-p1021_mds mpc85xx_mds boards, use "qe_ic_init(np, 0,
> > qe_ic_cascade_low_mpic, qe_ic_cascade_high_mpic);" instead of
> > "qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);".
> >
> > qe_ic_cascade_muxed_mpic was used for boards has the same interrupt
> > number for low interrupt and high interrupt, qe_ic_init has checked if
> > "low interrupt == high interrupt"
> >
> > Signed-off-by: Zhao Qiang <qiang.z...@nxp.com>
> > ---
> > Changes for v2:
> >     - modify subject and commit msg
> >     - add check for qeic by type
> > Changes for v3:
> >     - na
> > Changes for v4:
> >     - na
> > Changes for v5:
> >     - na
> > Changes for v6:
> >     - rebase
> >
> >  arch/powerpc/platforms/83xx/misc.c            | 15 ---------------
> >  arch/powerpc/platforms/85xx/corenet_generic.c |  9 ---------
> >  arch/powerpc/platforms/85xx/mpc85xx_mds.c     | 14 --------------
> >  arch/powerpc/platforms/85xx/mpc85xx_rdb.c     | 16 ----------------
> >  arch/powerpc/platforms/85xx/twr_p102x.c       | 14 --------------
> >  drivers/irqchip/irq-qeic.c                    | 16 ++++++++++++++++
> >  6 files changed, 16 insertions(+), 68 deletions(-)
> >
> 
> [...]
> 
> > --- a/drivers/irqchip/irq-qeic.c
> > +++ b/drivers/irqchip/irq-qeic.c
> > @@ -598,4 +598,20 @@ static int __init init_qe_ic_sysfs(void)
> >     return 0;
> >  }
> >
> > +static int __init qeic_of_init(void)
> > +{
> > +   struct device_node *np;
> > +
> > +   np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
> > +   if (!np) {
> > +           np = of_find_node_by_type(NULL, "qeic");
> > +           if (!np)
> > +                   return;
> > +   }
> > +   qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
> > +              qe_ic_cascade_high_mpic);
> > +   of_node_put(np);
> > +}
> 
> Have you actually compiled that code?

Yes.

Best Regards
Zhao Qiang