Hello,

Any comments on this patchset?

Best Regards
Zhao Qiang

> -----Original Message-----
> From: Zhao Qiang [mailto:qiang.z...@nxp.com]
> Sent: Wednesday, September 28, 2016 11:25 AM
> To: o...@buserror.net; t...@linutronix.de
> Cc: ja...@lakedaemon.net; marc.zyng...@arm.com; X.B. Xie
> <xiaobo....@nxp.com>; linux-kernel@vger.kernel.org; linuxppc-
> d...@lists.ozlabs.org; Qiang Zhao <qiang.z...@nxp.com>
> Subject: [PATCH v6 1/4] irqchip/qeic: move qeic driver from drivers/soc/fsl/qe
> 
> move the driver from drivers/soc/fsl/qe to drivers/irqchip, merge qe_ic.h and
> qe_ic.c into irq-qeic.c.
> 
> Signed-off-by: Zhao Qiang <qiang.z...@nxp.com>
> ---
> Changes for v2:
>       - modify the subject and commit msg
> Changes for v3:
>       - merge .h file to .c, rename it with irq-qeic.c Changes for v4:
>       - modify comments
> Changes for v5:
>       - disable rename detection
> Changes for v6:
>       - rebase
> 
>  drivers/irqchip/Makefile                           |   1 +
>  drivers/{soc/fsl/qe/qe_ic.c => irqchip/irq-qeic.c} |  95 ++++++++++++++++++-
>  drivers/soc/fsl/qe/Makefile                        |   2 +-
>  drivers/soc/fsl/qe/qe_ic.h                         | 103 
> ---------------------
>  4 files changed, 94 insertions(+), 107 deletions(-)  rename
> drivers/{soc/fsl/qe/qe_ic.c => irqchip/irq-qeic.c} (85%)  delete mode 100644
> drivers/soc/fsl/qe/qe_ic.h
> 
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index
> 4c203b6..face608 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -71,3 +71,4 @@ obj-$(CONFIG_MVEBU_ODMI)            += irq-mvebu-
> odmi.o
>  obj-$(CONFIG_LS_SCFG_MSI)            += irq-ls-scfg-msi.o
>  obj-$(CONFIG_EZNPS_GIC)                      += irq-eznps.o
>  obj-$(CONFIG_ARCH_ASPEED)            += irq-aspeed-vic.o
> +obj-$(CONFIG_QUICC_ENGINE)           += irq-qeic.o
> diff --git a/drivers/soc/fsl/qe/qe_ic.c b/drivers/irqchip/irq-qeic.c 
> similarity
> index 85% rename from drivers/soc/fsl/qe/qe_ic.c rename to
> drivers/irqchip/irq-qeic.c index ec2ca86..48ceded 100644
> --- a/drivers/soc/fsl/qe/qe_ic.c
> +++ b/drivers/irqchip/irq-qeic.c
> @@ -1,7 +1,7 @@
>  /*
> - * arch/powerpc/sysdev/qe_lib/qe_ic.c
> + * drivers/irqchip/irq-qeic.c
>   *
> - * Copyright (C) 2006 Freescale Semiconductor, Inc.  All rights reserved.
> + * Copyright (C) 2016 Freescale Semiconductor, Inc.  All rights reserved.
>   *
>   * Author: Li Yang <le...@freescale.com>
>   * Based on code from Shlomi Gridish <grid...@freescale.com> @@ -30,7
> +30,96 @@  #include <asm/io.h>  #include <soc/fsl/qe/qe_ic.h>
> 
> -#include "qe_ic.h"
> +#define NR_QE_IC_INTS                64
> +
> +/* QE IC registers offset */
> +#define QEIC_CICR            0x00
> +#define QEIC_CIVEC           0x04
> +#define QEIC_CRIPNR          0x08
> +#define QEIC_CIPNR           0x0c
> +#define QEIC_CIPXCC          0x10
> +#define QEIC_CIPYCC          0x14
> +#define QEIC_CIPWCC          0x18
> +#define QEIC_CIPZCC          0x1c
> +#define QEIC_CIMR            0x20
> +#define QEIC_CRIMR           0x24
> +#define QEIC_CICNR           0x28
> +#define QEIC_CIPRTA          0x30
> +#define QEIC_CIPRTB          0x34
> +#define QEIC_CRICR           0x3c
> +#define QEIC_CHIVEC          0x60
> +
> +/* Interrupt priority registers */
> +#define CIPCC_SHIFT_PRI0     29
> +#define CIPCC_SHIFT_PRI1     26
> +#define CIPCC_SHIFT_PRI2     23
> +#define CIPCC_SHIFT_PRI3     20
> +#define CIPCC_SHIFT_PRI4     13
> +#define CIPCC_SHIFT_PRI5     10
> +#define CIPCC_SHIFT_PRI6     7
> +#define CIPCC_SHIFT_PRI7     4
> +
> +/* CICR priority modes */
> +#define CICR_GWCC            0x00040000
> +#define CICR_GXCC            0x00020000
> +#define CICR_GYCC            0x00010000
> +#define CICR_GZCC            0x00080000
> +#define CICR_GRTA            0x00200000
> +#define CICR_GRTB            0x00400000
> +#define CICR_HPIT_SHIFT              8
> +#define CICR_HPIT_MASK               0x00000300
> +#define CICR_HP_SHIFT                24
> +#define CICR_HP_MASK         0x3f000000
> +
> +/* CICNR */
> +#define CICNR_WCC1T_SHIFT    20
> +#define CICNR_ZCC1T_SHIFT    28
> +#define CICNR_YCC1T_SHIFT    12
> +#define CICNR_XCC1T_SHIFT    4
> +
> +/* CRICR */
> +#define CRICR_RTA1T_SHIFT    20
> +#define CRICR_RTB1T_SHIFT    28
> +
> +/* Signal indicator */
> +#define SIGNAL_MASK          3
> +#define SIGNAL_HIGH          2
> +#define SIGNAL_LOW           0
> +
> +struct qe_ic {
> +     /* Control registers offset */
> +     volatile u32 __iomem *regs;
> +
> +     /* The remapper for this QEIC */
> +     struct irq_domain *irqhost;
> +
> +     /* The "linux" controller struct */
> +     struct irq_chip hc_irq;
> +
> +     /* VIRQ numbers of QE high/low irqs */
> +     unsigned int virq_high;
> +     unsigned int virq_low;
> +};
> +
> +/*
> + * QE interrupt controller internal structure  */ struct qe_ic_info {
> +     /* location of this source at the QIMR register. */
> +     u32     mask;
> +
> +     /* Mask register offset */
> +     u32     mask_reg;
> +
> +     /*
> +      * for grouped interrupts sources - the interrupt
> +      * code as appears at the group priority register
> +      */
> +     u8      pri_code;
> +
> +     /* Group priority register offset */
> +     u32     pri_reg;
> +};
> 
>  static DEFINE_RAW_SPINLOCK(qe_ic_lock);
> 
> diff --git a/drivers/soc/fsl/qe/Makefile b/drivers/soc/fsl/qe/Makefile index
> 2031d38..51e4726 100644
> --- a/drivers/soc/fsl/qe/Makefile
> +++ b/drivers/soc/fsl/qe/Makefile
> @@ -1,7 +1,7 @@
>  #
>  # Makefile for the linux ppc-specific parts of QE  # -obj-
> $(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_ic.o qe_io.o
> +obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_common.o qe_io.o
>  obj-$(CONFIG_CPM)    += qe_common.o
>  obj-$(CONFIG_UCC)    += ucc.o
>  obj-$(CONFIG_UCC_SLOW)       += ucc_slow.o
> diff --git a/drivers/soc/fsl/qe/qe_ic.h b/drivers/soc/fsl/qe/qe_ic.h deleted 
> file
> mode 100644 index 926a2ed..0000000
> --- a/drivers/soc/fsl/qe/qe_ic.h
> +++ /dev/null
> @@ -1,103 +0,0 @@
> -/*
> - * drivers/soc/fsl/qe/qe_ic.h
> - *
> - * QUICC ENGINE Interrupt Controller Header
> - *
> - * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
> - *
> - * Author: Li Yang <le...@freescale.com>
> - * Based on code from Shlomi Gridish <grid...@freescale.com>
> - *
> - * This program is free software; you can redistribute  it and/or modify it
> - * under  the terms of  the GNU General  Public License as published by the
> - * Free Software Foundation;  either version 2 of the  License, or (at your
> - * option) any later version.
> - */
> -#ifndef _POWERPC_SYSDEV_QE_IC_H
> -#define _POWERPC_SYSDEV_QE_IC_H
> -
> -#include <soc/fsl/qe/qe_ic.h>
> -
> -#define NR_QE_IC_INTS                64
> -
> -/* QE IC registers offset */
> -#define QEIC_CICR            0x00
> -#define QEIC_CIVEC           0x04
> -#define QEIC_CRIPNR          0x08
> -#define QEIC_CIPNR           0x0c
> -#define QEIC_CIPXCC          0x10
> -#define QEIC_CIPYCC          0x14
> -#define QEIC_CIPWCC          0x18
> -#define QEIC_CIPZCC          0x1c
> -#define QEIC_CIMR            0x20
> -#define QEIC_CRIMR           0x24
> -#define QEIC_CICNR           0x28
> -#define QEIC_CIPRTA          0x30
> -#define QEIC_CIPRTB          0x34
> -#define QEIC_CRICR           0x3c
> -#define QEIC_CHIVEC          0x60
> -
> -/* Interrupt priority registers */
> -#define CIPCC_SHIFT_PRI0     29
> -#define CIPCC_SHIFT_PRI1     26
> -#define CIPCC_SHIFT_PRI2     23
> -#define CIPCC_SHIFT_PRI3     20
> -#define CIPCC_SHIFT_PRI4     13
> -#define CIPCC_SHIFT_PRI5     10
> -#define CIPCC_SHIFT_PRI6     7
> -#define CIPCC_SHIFT_PRI7     4
> -
> -/* CICR priority modes */
> -#define CICR_GWCC            0x00040000
> -#define CICR_GXCC            0x00020000
> -#define CICR_GYCC            0x00010000
> -#define CICR_GZCC            0x00080000
> -#define CICR_GRTA            0x00200000
> -#define CICR_GRTB            0x00400000
> -#define CICR_HPIT_SHIFT              8
> -#define CICR_HPIT_MASK               0x00000300
> -#define CICR_HP_SHIFT                24
> -#define CICR_HP_MASK         0x3f000000
> -
> -/* CICNR */
> -#define CICNR_WCC1T_SHIFT    20
> -#define CICNR_ZCC1T_SHIFT    28
> -#define CICNR_YCC1T_SHIFT    12
> -#define CICNR_XCC1T_SHIFT    4
> -
> -/* CRICR */
> -#define CRICR_RTA1T_SHIFT    20
> -#define CRICR_RTB1T_SHIFT    28
> -
> -/* Signal indicator */
> -#define SIGNAL_MASK          3
> -#define SIGNAL_HIGH          2
> -#define SIGNAL_LOW           0
> -
> -struct qe_ic {
> -     /* Control registers offset */
> -     volatile u32 __iomem *regs;
> -
> -     /* The remapper for this QEIC */
> -     struct irq_domain *irqhost;
> -
> -     /* The "linux" controller struct */
> -     struct irq_chip hc_irq;
> -
> -     /* VIRQ numbers of QE high/low irqs */
> -     unsigned int virq_high;
> -     unsigned int virq_low;
> -};
> -
> -/*
> - * QE interrupt controller internal structure
> - */
> -struct qe_ic_info {
> -     u32     mask;     /* location of this source at the QIMR register. */
> -     u32     mask_reg; /* Mask register offset */
> -     u8      pri_code; /* for grouped interrupts sources - the interrupt
> -                          code as appears at the group priority register */
> -     u32     pri_reg;  /* Group priority register offset */
> -};
> -
> -#endif /* _POWERPC_SYSDEV_QE_IC_H */
> --
> 2.1.0.27.g96db324

Reply via email to