Main memory initialization method looks messy with cmd line parser
built-in. So it's better for readability to put it into a separated
method.
Signed-off-by: Serge Semin <fancer.lan...@gmail.com>
---
arch/mips/kernel/setup.c | 87 ++++++++++++++++--------------
1 file changed, 48 insertions(+), 39 deletions(-)
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 52205fb..9c1a60d 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -231,6 +231,51 @@ static void __init print_memory_map(void)
}
/*
+ * Parse passed cmdline
+ */
+#define USE_PROM_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER)
+#define USE_DTB_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB)
+#define EXTEND_WITH_PROM IS_ENABLED(CONFIG_MIPS_CMDLINE_EXTEND)
+#define BUILTIN_EXTEND_WITH_PROM \
+ IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND)
+
+static void __init mips_parse_param(char **cmdline_p)
+{
+#if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE)
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#else
+ if ((USE_PROM_CMDLINE && arcs_cmdline[0]) ||
+ (USE_DTB_CMDLINE && !boot_command_line[0]))
+ strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
+
+ if (EXTEND_WITH_PROM && arcs_cmdline[0]) {
+ if (boot_command_line[0])
+ strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
+ strlcat(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
+ }
+
+#if defined(CONFIG_CMDLINE_BOOL)
+ if (builtin_cmdline[0]) {
+ if (boot_command_line[0])
+ strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
+ strlcat(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+ }
+
+ if (BUILTIN_EXTEND_WITH_PROM && arcs_cmdline[0]) {
+ if (boot_command_line[0])
+ strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
+ strlcat(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
+ }
+#endif
+#endif
+ strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
+
+ *cmdline_p = command_line;
+
+ parse_early_param();
+}
+
+/*
* Parse "mem=size@start" parameter rewriting a defined memory map
* We look for mem=size@start, where start and size are "value[KkMm]"
*/
@@ -790,12 +835,6 @@ static void __init arch_mem_addpart(phys_addr_t mem,
phys_addr_t end, int type)
add_memory_region(mem, size, type);
}
-#define USE_PROM_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER)
-#define USE_DTB_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB)
-#define EXTEND_WITH_PROM IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND)
-#define BUILTIN_EXTEND_WITH_PROM \
- IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND)
-
static void __init arch_mem_init(char **cmdline_p)
{
struct memblock_region *reg;
@@ -804,6 +843,9 @@ static void __init arch_mem_init(char **cmdline_p)
/* call board setup routine */
plat_mem_setup();
+ /* Parse passed parameters */
+ mips_parse_param(cmdline_p);
+
/*
* Make sure all kernel memory is in the maps. The "UP" and
* "DOWN" are opposite for initdata since if it crosses over
@@ -820,39 +862,6 @@ static void __init arch_mem_init(char **cmdline_p)
pr_info("Determined physical RAM map:\n");
print_memory_map();
-#if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE)
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-#else
- if ((USE_PROM_CMDLINE && arcs_cmdline[0]) ||
- (USE_DTB_CMDLINE && !boot_command_line[0]))
- strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
-
- if (EXTEND_WITH_PROM && arcs_cmdline[0]) {
- if (boot_command_line[0])
- strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
- strlcat(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
- }
-
-#if defined(CONFIG_CMDLINE_BOOL)
- if (builtin_cmdline[0]) {
- if (boot_command_line[0])
- strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
- strlcat(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- }
-
- if (BUILTIN_EXTEND_WITH_PROM && arcs_cmdline[0]) {
- if (boot_command_line[0])
- strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
- strlcat(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE);
- }
-#endif
-#endif
- strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
-
- *cmdline_p = command_line;
-
- parse_early_param();
-
bootmem_init();
device_tree_init();
--
2.6.6
