Delete apparently unused header file drivers/char/digi.h.

Signed-off-by: Robert P. J. Day <[EMAIL PROTECTED]>

---

  not sure who the proper maintainer is on this one.


diff --git a/drivers/char/digi.h b/drivers/char/digi.h
deleted file mode 100644
index 19df0e8..0000000
--- a/drivers/char/digi.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*          Definitions for DigiBoard ditty(1) command.                 */
-
-#if !defined(TIOCMODG)
-#define        TIOCMODG        (('d'<<8) | 250)                /* get modem 
ctrl state */
-#define        TIOCMODS        (('d'<<8) | 251)                /* set modem 
ctrl state */
-#endif
-
-#if !defined(TIOCMSET)
-#define        TIOCMSET        (('d'<<8) | 252)                /* set modem 
ctrl state */
-#define        TIOCMGET        (('d'<<8) | 253)                /* set modem 
ctrl state */
-#endif
-
-#if !defined(TIOCMBIC)
-#define        TIOCMBIC        (('d'<<8) | 254)                /* set modem 
ctrl state */
-#define        TIOCMBIS        (('d'<<8) | 255)                /* set modem 
ctrl state */
-#endif
-
-#if !defined(TIOCSDTR)
-#define        TIOCSDTR        (('e'<<8) | 0)          /* set DTR              
*/
-#define        TIOCCDTR        (('e'<<8) | 1)          /* clear DTR            
*/
-#endif
-
-/************************************************************************
- * Ioctl command arguments for DIGI parameters.
- ************************************************************************/
-#define DIGI_GETA      (('e'<<8) | 94)         /* Read params          */
-
-#define DIGI_SETA      (('e'<<8) | 95)         /* Set params           */
-#define DIGI_SETAW     (('e'<<8) | 96)         /* Drain & set params   */
-#define DIGI_SETAF     (('e'<<8) | 97)         /* Drain, flush & set params */
-
-#define        DIGI_GETFLOW    (('e'<<8) | 99)         /* Get startc/stopc 
flow */
-                                               /* control characters    */
-#define        DIGI_SETFLOW    (('e'<<8) | 100)                /* Set 
startc/stopc flow */
-                                               /* control characters    */
-#define        DIGI_GETAFLOW   (('e'<<8) | 101)                /* Get Aux. 
startc/stopc */
-                                               /* flow control chars    */
-#define        DIGI_SETAFLOW   (('e'<<8) | 102)                /* Set Aux. 
startc/stopc */
-                                               /* flow control chars    */
-
-struct digiflow_struct {
-       unsigned char   startc;                         /* flow cntl start char 
*/
-       unsigned char   stopc;                          /* flow cntl stop char  
*/
-};
-
-typedef struct digiflow_struct digiflow_t;
-
-
-/************************************************************************
- * Values for digi_flags
- ************************************************************************/
-#define DIGI_IXON      0x0001          /* Handle IXON in the FEP       */
-#define DIGI_FAST      0x0002          /* Fast baud rates              */
-#define RTSPACE                0x0004          /* RTS input flow control       
*/
-#define CTSPACE                0x0008          /* CTS output flow control      
*/
-#define DSRPACE                0x0010          /* DSR output flow control      
*/
-#define DCDPACE                0x0020          /* DCD output flow control      
*/
-#define DTRPACE                0x0040          /* DTR input flow control       
*/
-#define DIGI_FORCEDCD  0x0100          /* Force carrier                */
-#define        DIGI_ALTPIN     0x0200          /* Alternate RJ-45 pin config   
*/
-#define        DIGI_AIXON      0x0400          /* Aux flow control in fep      
*/
-
-
-/************************************************************************
- * Structure used with ioctl commands for DIGI parameters.
- ************************************************************************/
-struct digi_struct {
-       unsigned short  digi_flags;             /* Flags (see above)    */
-};
-
-typedef struct digi_struct digi_t;

-- 
========================================================================
Robert P. J. Day
Linux Consulting, Training and Annoying Kernel Pedantry
Waterloo, Ontario, CANADA

http://fsdev.net/wiki/index.php?title=Main_Page
========================================================================
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to