Re: [PATCH v2 14/14] ARM: dts: da850-lcdk: enable the SATA node

[David Lechner]

On 01/17/2017 06:26 AM, Bartosz Golaszewski wrote:
Enable the SATA node for da850-lcdk. We omit the pinctrl property on
purpose - the muxed SATA pins are not hooked up to anything
SATA-related on the lcdk.
The REFCLKN/P rate on the board is 100MHz, so we need a multiplier of
15 for 1.5GHz PLL rate.

The multiplier is no longer in device tree, so this comment is not 
necessary.


Signed-off-by: Bartosz Golaszewski <bgolaszew...@baylibre.com>
---
 arch/arm/boot/dts/da850-lcdk.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index afcb482..fbeee3c 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -105,6 +105,10 @@
        status = "okay";
 };

+&sata {
+       status = "okay";
+};
+
 &mdio {
        pinctrl-names = "default";
        pinctrl-0 = <&mdio_pins>;