Here's V3 of the serdev bus support with all the review feedback so far incorporated. Greg applied the first 4 patches already. I also found a problem in the tty_port_wakeup changes and have fixed that.
I've added serdev support to the BT hci_ll.c driver as it turns out it works on newer TI chips too, but just needed firmware loading. That avoids the impossible mess of cleaning up the TI-ST driver, and it's in a much closer state to being ready for upstream. I've sent that out separately. Changelog is in individual patches. Previous versions are here[1][2]. This series and the mentioned drivers can be found here[3]. Rob [1] http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1304151.html [2] http://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1311650.html [3] git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git serial-bus-v4 Rob Herring (5): tty_port: Add port client functions dt/bindings: Add a serial/UART attached device binding serdev: Introduce new bus for serial attached devices serdev: add a tty port controller driver tty_port: register tty ports with serdev bus .../devicetree/bindings/serial/slave-device.txt | 36 ++ MAINTAINERS | 8 + drivers/char/Kconfig | 1 + drivers/tty/Makefile | 1 + drivers/tty/serdev/Kconfig | 16 + drivers/tty/serdev/Makefile | 5 + drivers/tty/serdev/core.c | 421 +++++++++++++++++++++ drivers/tty/serdev/serdev-ttyport.c | 226 +++++++++++ drivers/tty/tty_buffer.c | 17 +- drivers/tty/tty_port.c | 58 ++- include/linux/serdev.h | 262 +++++++++++++ include/linux/tty.h | 9 +- 12 files changed, 1039 insertions(+), 21 deletions(-) create mode 100644 Documentation/devicetree/bindings/serial/slave-device.txt create mode 100644 drivers/tty/serdev/Kconfig create mode 100644 drivers/tty/serdev/Makefile create mode 100644 drivers/tty/serdev/core.c create mode 100644 drivers/tty/serdev/serdev-ttyport.c create mode 100644 include/linux/serdev.h -- 2.10.1
