Hi Vinod,
On 2017-02-13 03:03, Vinod Koul wrote:
On Fri, Feb 10, 2017 at 02:57:09PM +0100, Ulf Hansson wrote:
On 10 February 2017 at 12:51, Marek Szyprowski <m.szyprow...@samsung.com> wrote:
On 2017-02-10 05:50, Vinod Koul wrote:
On Thu, Feb 09, 2017 at 03:22:51PM +0100, Marek Szyprowski wrote:
+static int pl330_set_slave(struct dma_chan *chan, struct device *slave)
+{
+ struct dma_pl330_chan *pch = to_pchan(chan);
+ struct pl330_dmac *pl330 = pch->dmac;
+ int i;
+
+ mutex_lock(&pl330->rpm_lock);
+
+ for (i = 0; i < pl330->num_peripherals; i++) {
+ if (pl330->peripherals[i].chan.slave == slave &&
+ pl330->peripherals[i].slave_link) {
+ pch->slave_link =
pl330->peripherals[i].slave_link;
+ goto done;
+ }
+ }
+
+ pch->slave_link = device_link_add(slave, pl330->ddma.dev,
+ DL_FLAG_PM_RUNTIME |
DL_FLAG_RPM_ACTIVE);
So you are going to add the link on channel allocation and tear down on
the
freeup.
Right. Channel allocation is typically done once per driver operation and it
won't hurt system performance.
I am not sure I really like the idea here.
Could you point what's wrong with it?
First, these thing shouldn't be handled in the drivers. These things
should
be set in core and each driver setting the links doesn't sound great to
me.
Which core? And what's wrong with the device links? They have been
introduced to
model relations between devices that are behind the usual parent/child/bus
topology.
I think Vinod mean the dmaengine core. Which also would make perfect
sense to me as it would benefit all dma drivers.
Right.
The only related PM thing, that shall be the decision of the driver,
is whether it wants to enable runtime PM or not, during ->probe().
We can do pm_runtime_enabled() to check and that and do when enabled..
Another subtle issue is that there can be only one link between devices, but
it is common to request more than one channel per client device (for example
"tx" and "rx"), but this can be handled by internal reference counting.
Second, should the link be always there and we only mange the state? Here
it
seems that we have link being created and destroyed, so why not mark it
ACTIVE and DORMANT instead...
Link state is managed by device core and should not be touched by the
drivers.
It is related to both provider and consumer drivers states (probed/not
probed/etc).
Second we would need to create those links first. The question is where to
create them then.
Just to fill in, to me this is really also the key question.
If we could set up the device link already at device initialization,
it should also be possible to avoid getting -EPROBE_DEFER for dma
client drivers when requesting their dma channels.
Well if we defer then driver will regiser with dmaengine after it is
probed, so a client will either get a channel or not. IOW we won't get
-EPROBE_DEFER.
I don't get how this will work. IMHO the link should be created WHEN client
driver requests the channel, because otherwise we will get links that might
be not used at all (for example optional DMA usage, but the link will force
DMA controller to active state even if client device doesn't want to use DMA
at all). So if client requests it for the first time and the DMA engine has
not been probed yet, there is no way to avoid -EPROBE_DEFER.
Lastly, looking at th description of the issue here, am perceiving (maybe
my
understanding is not quite right here) that you have an IP block in SoC
which has multiple things and share common stuff and doing right PM is a
challenge for you, right?
Nope. Doing right PM in my SoC is not that complex and I would say it is
rather
typical for any embedded stuff. It works fine (in terms of the power
consumption reduction) when all drivers simply properly manage their runtime
PM state, thus if device is not in use, the state is set to suspended and
finally, the power domain gets turned off.
I've used device links for PM only because the current DMA engine API is
simply insufficient to implement it in the other way.
I want to let a power domain, which contains a few devices, among those a
PL330
device, to get turned off when there is no activity. Handling power domain
power
on / off requires non-atomic context, what is typical for runtime pm calls.
For
that I need to have non-irq-safe runtime pm implemented for all devices that
belongs to that domains.
Again, allow me to fill in. This issue exists for all ARM SoC which
has a dma controller residing in a PM domain. I think that is quite
many.
Currently the only solution I have seen for this problem, but which I
really dislike. That is, each dma client driver requests/releases
their dma channel from their respective ->runtime_suspend|resume()
callbacks - then the dma driver can use the dma request/release hooks,
to do pm_runtime_get|put() which then becomes non-irq-safe.
Yeah that is not the best way to do. But looking at it current one doesnt
seem best fit either.
So on seeing the device_link_add() I was thinking that this is some SoC
dependent problem being solved whereas the problem statmement is non-atomic
channel prepare.
As I said earlier, if we want to solve that problem a better idea is to
actually split the prepare as we discussed in [1]
This way we can get a non atomic descriptor allocate/prepare and release.
Yes we need to redesign the APIs to solve this, but if you guys are up for
it, I think we can do it and avoid any further round abouts :)
I also agree that the main problem here is lack of non-atomic call for
preparing the channel. However I don't feel I'm a right person for rewriting
all the existing DMA engine drivers and clients for the new API. :/
The problem with PL330 driver is that it use irq-safe runtime pm, which like
it
was stated in the patch description doesn't bring much benefits. To switch
to
standard (non-irq-safe) runtime pm, the pm_runtime calls have to be done
from
a context which permits sleeping. The problem with DMA engine driver API is
that
most of its callbacks have to be IRQ-safe and frankly only
device_{alloc,release}_chan_resources() what more or less maps to
dma_request_chan()/dma_release_channel() and friends. There are DMA engine
drivers which do runtime PM calls there (tegra20-apb-dma, sirf-dma, cppi41,
rcar-dmac), but this is not really efficient. DMA engine clients usually
allocate
dma channel during their probe() and keep them for the whole driver life. In
turn
this very similar to calling pm_runtime_get() in the DMA engine driver
probe().
The result of both approaches is that DMA engine device keeps its power
domain
enabled almost all the time. This problem is also mentioned in the DMA
engine
TODO list, you have pointed me yesterday.
To avoid such situation that DMA engine driver blocks turning off the power
domain and avoid changing DMA engine client API I came up with the device
links
pm based approach. I don't want to duplicate the description here, the
details
were in the patch description, however if you have any particular question
about
the details, let me know and I will try to clarify it more.
So besides solving the irq-safe issue for dma driver, using the
device-links has additionally two advantages. I already mentioned the
-EPROBE_DEFER issue above.
The second thing, is the runtime/system PM relations we get for free
by using the links. In other words, the dma driver/core don't need to
care about dealing with pm_runtime_get|put() as that would be managed
by the dma client driver.
Yeah sorry took me a while to figure that out :), If we do a different API
then dmaengine core can call pm_runtime_get|put() from non-atomic context.
[1]: http://www.spinics.net/lists/dmaengine/msg11570.html
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
