Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robso...@gmail.com>
---
.../staging/rtl8192u/ieee80211/ieee80211_softmac.c | 71 +++++++++++-----------
1 file changed, 36 insertions(+), 35 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index 1bff0e91cc0c..58df6910584c 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -204,14 +204,14 @@ static u8 MgntQuery_MgntFrameTxRate(struct
ieee80211_device *ieee)
}
/*
- // Data rate of ProbeReq is already decided. Annie, 2005-03-31
- if( pMgntInfo->bScanInProgress || (pMgntInfo->bDualModeScanStep!=0) )
- {
- if(pMgntInfo->dot11CurrentWirelessMode==WIRELESS_MODE_A)
- rate = 0x0c;
- else
- rate = 0x02;
- }
+ * //Data rate of ProbeReq is already decided. Annie, 2005-03-31
+ * if( pMgntInfo->bScanInProgress || (pMgntInfo->bDualModeScanStep!=0) )
+ * {
+ * if(pMgntInfo->dot11CurrentWirelessMode==WIRELESS_MODE_A)
+ * rate = 0x0c;
+ * else
+ * rate = 0x02;
+ * }
*/
return rate;
}
@@ -272,10 +272,10 @@ inline void softmac_mgmt_xmit(struct sk_buff *skb, struct
ieee80211_device *ieee
if(!ieee->check_nic_enough_desc(ieee->dev,tcb_desc->queue_index)||\
(skb_queue_len(&ieee->skb_waitQ[tcb_desc->queue_index]) != 0)||\
(ieee->queue_stop) ) {
- /* insert the skb packet to the management queue */
- /* as for the completion function, it does not need
+ /* insert the skb packet to the management queue
+ * as for the completion function, it does not need
* to check it any more.
- * */
+ */
printk("%s():insert to waitqueue!\n",__func__);
skb_queue_tail(&ieee->skb_waitQ[tcb_desc->queue_index],
skb);
} else {
@@ -1460,8 +1460,8 @@ inline void ieee80211_softmac_new_net(struct
ieee80211_device *ieee, struct ieee
(!apset && ssidset && ssidbroad && ssidmatch)
){
/* if the essid is hidden replace it with the
- * essid provided by the user.
- */
+ * essid provided by the user.
+ */
if (!ssidbroad) {
strncpy(tmp_ssid,
ieee->current_network.ssid, IW_ESSID_MAX_SIZE);
tmp_ssid_len =
ieee->current_network.ssid_len;
@@ -1731,11 +1731,10 @@ static short ieee80211_sta_ps_sleep(struct
ieee80211_device *ieee, u32 *time_h,
int timeout = ieee->ps_timeout;
u8 dtim;
/*if(ieee->ps == IEEE80211_PS_DISABLED ||
- ieee->iw_mode != IW_MODE_INFRA ||
- ieee->state != IEEE80211_LINKED)
-
- return 0;
- */
+ * ieee->iw_mode != IW_MODE_INFRA ||
+ * ieee->state != IEEE80211_LINKED)
+ * return 0;
+ */
dtim = ieee->current_network.dtim_data;
if(!(dtim & IEEE80211_DTIM_VALID))
return 0;
@@ -2097,8 +2096,8 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee,
struct sk_buff *skb,
case IEEE80211_STYPE_DISASSOC:
case IEEE80211_STYPE_DEAUTH:
/* FIXME for now repeat all the association procedure
- * both for disassociation and deauthentication
- */
+ * both for disassociation and deauthentication
+ */
if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
ieee->state == IEEE80211_LINKED &&
ieee->iw_mode == IW_MODE_INFRA){
@@ -2173,7 +2172,7 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb,
struct ieee80211_device *
/* insert the skb packet to the wait queue */
/* as for the completion function, it does not need
* to check it any more.
- * */
+ */
//printk("error:no descriptor left@queue_index %d\n",
queue_index);
//ieee80211_stop_queue(ieee);
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
@@ -2522,18 +2521,18 @@ static void ieee80211_associate_retry_wq(struct
work_struct *work)
goto exit;
/* until we do not set the state to IEEE80211_NOLINK
- * there are no possibility to have someone else trying
- * to start an association procedure (we get here with
- * ieee->state = IEEE80211_ASSOCIATING).
- * When we set the state to IEEE80211_NOLINK it is possible
- * that the RX path run an attempt to associate, but
- * both ieee80211_softmac_check_all_nets and the
- * RX path works with ieee->lock held so there are no
- * problems. If we are still disassociated then start a scan.
- * the lock here is necessary to ensure no one try to start
- * an association procedure when we have just checked the
- * state and we are going to start the scan.
- */
+ * there are no possibility to have someone else trying
+ * to start an association procedure (we get here with
+ * ieee->state = IEEE80211_ASSOCIATING).
+ * When we set the state to IEEE80211_NOLINK it is possible
+ * that the RX path run an attempt to associate, but
+ * both ieee80211_softmac_check_all_nets and the
+ * RX path works with ieee->lock held so there are no
+ * problems. If we are still disassociated then start a scan.
+ * the lock here is necessary to ensure no one try to start
+ * an association procedure when we have just checked the
+ * state and we are going to start the scan.
+ */
ieee->state = IEEE80211_NOLINK;
ieee80211_softmac_check_all_nets(ieee);
@@ -2771,7 +2770,8 @@ void ieee80211_softmac_free(struct ieee80211_device *ieee)
static int ieee80211_wpa_enable(struct ieee80211_device *ieee, int value)
{
/* This is called when wpa_supplicant loads and closes the driver
- * interface. */
+ * interface.
+ */
printk("%s WPA\n", value ? "enabling" : "disabling");
ieee->wpa_enabled = value;
return 0;
@@ -3086,7 +3086,8 @@ static int ieee80211_wpa_set_encryption(struct
ieee80211_device *ieee,
* generate new IEEE 802.11 authentication which may end up in looping
* with IEEE 802.1X. If your hardware requires a reset after WEP
* configuration (for example... Prism2), implement the reset_port in
- * the callbacks structures used to initialize the 802.11 stack. */
+ * the callbacks structures used to initialize the 802.11 stack.
+ */
if (ieee->reset_on_keychange &&
ieee->iw_mode != IW_MODE_INFRA &&
ieee->reset_port &&
--
2.11.1
