On Tue, Feb 21, 2017 at 03:12:53PM -0300, Javier Martinez Canillas wrote: > The driver doesn't have a struct of_device_id table but supported devices > are registered via Device Trees. This is working on the assumption that a > I2C device registered via OF will always match a legacy I2C device ID and > that the MODALIAS reported will always be of the form i2c:<device>. > > But this could change in the future so the correct approach is to have an > OF device ID table if the devices are registered via OF.
This driver is for touchpad controller on a specific device, and as far as I understand, for a specific firmware. I am not sure if it will ever be reused. Igor, maybe we need to drop it altogether? > > Signed-off-by: Javier Martinez Canillas <[email protected]> > --- > > drivers/input/mouse/synaptics_i2c.c | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/drivers/input/mouse/synaptics_i2c.c > b/drivers/input/mouse/synaptics_i2c.c > index cb2bf203f4ca..8538318d332c 100644 > --- a/drivers/input/mouse/synaptics_i2c.c > +++ b/drivers/input/mouse/synaptics_i2c.c > @@ -652,9 +652,18 @@ static const struct i2c_device_id > synaptics_i2c_id_table[] = { > }; > MODULE_DEVICE_TABLE(i2c, synaptics_i2c_id_table); > > +#ifdef CONFIG_OF > +static const struct of_device_id synaptics_i2c_of_match[] = { > + { .compatible = "synaptics,synaptics_i2c", }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, synaptics_i2c_of_match); > +#endif > + > static struct i2c_driver synaptics_i2c_driver = { > .driver = { > .name = DRIVER_NAME, > + .of_match_table = of_match_ptr(synaptics_i2c_of_match), > .pm = &synaptics_i2c_pm, > }, > > -- > 2.9.3 > -- Dmitry
