Hi Brian,

Am Donnerstag, 9. Februar 2017, 17:05:19 CET schrieb Brian Norris:
> Kevin is part of a family of boards called Gru. As best as possible, the
> properties shared by the Gru family are placed in rk3399-gru.dtsi, while
> Kevin-specific bits are in rk3399-gru-kevin.dts. This does not add full
> support for the base Gru board.
> 

short summary of what we just talked about, and some more minor things I found

[...]

> +     /* pp3300 children */

drop that. I may not have caught all of them, but you get the idea ;-)


> +     pp3300_wifi_bt: pp3300-wifi-bt {
> +             compatible = "regulator-fixed";
> +             regulator-name = "pp3300_wifi_bt";
> +             /* NOTE: wlan_module_pd_l pinctrl in pp1800_pcie */
> +
> +             enable-active-high;
> +
> +             /* NOTE: this GPIO also used in pp1800_pcie */

does the gpio subsystem like this double usage?

> +             gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
> +
> +             vin-supply = <&pp3300>;
> +     };
> +
> +     /* pp5000 aliases; these are always on for AP so just use alias */

drop that

> +
> +     /* EC turns on w/ usb_a_en */
> +     pp5000_usb_a_vbus: pp5000 {
> +     };
> +
> +     /* END REGULATORS */

drop that

> +
> +     io-domains {

&io_domains instead

> +             compatible = "rockchip,rk3399-io-voltage-domain";
> +             rockchip,grf = <&grf>;
> +
> +             bt656-supply = <&pp1800_ap_io>;         /* APIO2_VDD;  2a 2b */
> +             audio-supply = <&pp1800_audio>;         /* APIO5_VDD;  3d 4a */
> +             sdmmc-supply = <&ppvar_sd_card_io>;     /* SDMMC0_VDD; 4b    */
> +             gpio1830-supply = <&pp3000_ap>;         /* APIO4_VDD;  4c 4d */
> +     };


> +     pmu-io-domains {

&pmu_io_domains instead

> +             compatible = "rockchip,rk3399-pmu-io-voltage-domain";
> +             rockchip,grf = <&pmugrf>;
> +
> +             pmu1830-supply = <&pp1800_pmu>;         /* PMUIO2_VDD */
> +     };


> +#include "common/cros-ec-keyboard.dtsi"
> +#include "common/cros-ec-sbs.dtsi"

please try the arm include symlinks instead


> +
> +/* PINCTRL: always below everything else */
> +

 drop this

> +
> +/* DON'T PUT ANYTHING BELOW HERE.  PUT IT ABOVE PINCTRL */
> +/* DON'T PUT ANYTHING BELOW HERE.  PUT IT ABOVE PINCTRL */
> +/* DON'T PUT ANYTHING BELOW HERE.  PUT IT ABOVE PINCTRL */
> +

drop these


Heiko

Reply via email to