On Wed, 2017-03-22 at 18:21 +0100, Geert Uytterhoeven wrote:
> Commit 7613c922315e308a ("backlight: pwm_bl: Move the checks for initial
> power state to a separate function") not just moved some code, but made
> slight changes in semantics.
>
> If a gpiochip doesn't implement the optional .get_direction() callback,
> gpiod_get_direction always returns -EINVAL, which is never equal to
> GPIOF_DIR_IN, leading to the GPIO not being configured for output.
>
> To avoid this, invert the test and check for not GPIOF_DIR_OUT instead,
> like the original code did.
>
> This restores the display on r8a7740/armadillo.
>
> Fixes: 7613c922315e308a ("backlight: pwm_bl: Move the checks for initial
> power state to a separate function")
> Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
Acked-by: Philipp Zabel <p.za...@pengutronix.de>
regards
Philipp
> ---
> drivers/video/backlight/pwm_bl.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/video/backlight/pwm_bl.c
> b/drivers/video/backlight/pwm_bl.c
> index d7efcb632f7d9dde..002f1ce22bd02032 100644
> --- a/drivers/video/backlight/pwm_bl.c
> +++ b/drivers/video/backlight/pwm_bl.c
> @@ -297,14 +297,15 @@ static int pwm_backlight_probe(struct platform_device
> *pdev)
> }
>
> /*
> - * If the GPIO is configured as input, change the direction to output
> - * and set the GPIO as active.
> + * If the GPIO is not known to be already configured as output, that
> + * is, if gpiod_get_direction returns either GPIOF_DIR_IN or -EINVAL,
> + * change the direction to output and set the GPIO as active.
> * Do not force the GPIO to active when it was already output as it
> * could cause backlight flickering or we would enable the backlight too
> * early. Leave the decision of the initial backlight state for later.
> */
> if (pb->enable_gpio &&
> - gpiod_get_direction(pb->enable_gpio) == GPIOF_DIR_IN)
> + gpiod_get_direction(pb->enable_gpio) != GPIOF_DIR_OUT)
> gpiod_direction_output(pb->enable_gpio, 1);
>
> pb->power_supply = devm_regulator_get(&pdev->dev, "power");
