在 2017年04月03日 17:15, Maxime Ripard 写道:
On Sun, Apr 02, 2017 at 09:33:01PM +0800, Icenowy Zheng wrote:
Allwinner H3 features a thermal sensor like the one in A33, but has its
register re-arranged, the clock divider moved to CCU (originally the
clock divider is in ADC) and added a pair of bus clock and reset.
Update the binding document to cover H3.
Signed-off-by: Icenowy Zheng <icen...@aosc.io>
---
.../devicetree/bindings/mfd/sun4i-gpadc.txt | 23 ++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
index badff3611a98..7753133ca0ff 100644
--- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
+++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
@@ -4,12 +4,20 @@ The Allwinner SoCs all have an ADC that can also act as a
thermal sensor
and sometimes as a touchscreen controller.
Required properties:
- - compatible: "allwinner,sun8i-a33-ths",
+ - compatible: must contain one of the following compatibles:
+ - "allwinner,sun8i-a33-ths"
+ - "allwinner,sun8i-h3-ths"
- reg: mmio address range of the chip,
- #thermal-sensor-cells: shall be 0,
- #io-channel-cells: shall be 0,
-Example:
+Required properties for the following compatibles:
+ - "allwinner,sun8i-h3-ths"
+ - clocks: the bus clock and the input clock of the ADC,
+ - clock-names: should be "bus" and "ths",
I guess mod instead of ths would be more consistent.
In fact I will prefer "sample" here if not "ths", as it's used
for the sampling, not like other mod clocks, which controls
all the IP block's logic.
Maxime
