From: Icenowy Zheng <icen...@aosc.xyz>
A64 SoC have a CCU (r_ccu) in PRCM block.
Add the device node for it.
The mux 3 of R_CCU is an internal oscillator, which is 16MHz according
to the user manual, and has only 30% accuracy based on our experience
on older SoCs. The real mesaured value of it on two Pine64 boards is
around 11MHz, which is around 70% of 16MHz.
Signed-off-by: Icenowy Zheng <icen...@aosc.xyz>
---
Changes in v4:
- Temporarily dropped the CCU headers.
Changes in v3:
- Change osc32000 to iosc, which is 16MHz plus minus 30%, according to the
RTC chapter of the user manual and our experiences on A33.
Changes in v2:
- Add osc32000.
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 1c64ea2d23f9..1d4e5bcced0c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -98,6 +98,14 @@
clock-output-names = "osc32k";
};
+ iosc: internal-osc-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <16000000>;
+ clock-accuracy = <300000000>;
+ clock-output-names = "iosc";
+ };
+
psci {
compatible = "arm,psci-0.2";
method = "smc";
@@ -392,5 +400,14 @@
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ r_ccu: clock@1f01400 {
+ compatible = "allwinner,sun50i-a64-r-ccu";
+ reg = <0x01f01400 0x100>;
+ clocks = <&osc24M>, <&osc32k>, <&iosc>;
+ clock-names = "hosc", "losc", "iosc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
};
};
--
2.12.2
